Edelbrock Hydraulic Roller Lifter Kit for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983 and 1984 Mustangs with a 289, 302 or 351W Small Block Engine.
Increase the power & performance out of the 289, 302 or 351W engine in your 1965-1984 Mustang by ordering a Hydraulic Roller Lifter Kit from Edelbrock. This 97453 set of lifters will allow you to use a more modern roller camshaft on your non-roller cam block engine to increase the force of your engine, as well as the overall handling when you hit those higher RPMs.
Features & Benefits:
- Set of 16 - Eight Intake Lifters & Eight Exhaust Lifters
- Simple Drop-In Replacement
- Made from 86L20 Steel
- Precise Alignment
- Connected Together with a Tie Bar
- Reduces Operating Friction & Increases Torque
- Tighter Tolerance for High RPM Power & Handling
- Case is Heat-Treated to 50-52c
- Hardness to Depth of .01"-.015"
This kit from Edelbrock comes with a set of sixteen hydraulic roller lifters that are tied together into eight different assemblies. Each assembly consists of one intake lifter & one exhaust lifter that are connected with a tie bar. Designed to be used on early model Mustangs that have a non-roller engine block that was original equipped with a conventional lifter, Edelbrock's 97453 roller lifters have a retro-fit design that will allow for a simple drop-in replacement without block modifications.
Each lifter has been tested and assembled to high-quality standards that Edelbrock has become known for. The lifters are crafted from 86L20 steel and the case is heat-treated to 50-52c hardness to a depth of .01"-.015". The outside finish has a R.E.M. micro-finish at 2 RMA. The tie bar connecting each lifter will make for a more precise alignment in your Mustang's engine bay.
Once installed, this hydraulic roller lifter kit will increase the performance of your Mustang by reducing the operating friction and increasing your Pony's torque for more broad power & engine durability. The high & tight ID tolerances will allow Edelbrock's 9743 hydraulic roller lifter to provide you with more control when you push the limits at higher RPMs. This high-quality & unsurpassed performance modification is a fantastic upgrade with minimal work to increase your Mustang's performance quality.
If you're looking for more performance from your Mustang, check out Edelbrock, who is one of the industry leaders with parts for 1964-2014 Mustangs and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Mustang with high quality performance products.
Go ahead and purchase Edelbrock's Hydraulic Roller Lifter Kit for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983 or 1984 Mustang with a 289, 302 or 351W Small Block Engine from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$141.37
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$3,637.34
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$3,781.18
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$3,579.93
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$53.99