In-Tank 400 LPH EFI Fuel Pump Assembly for use with EFI Fuel Tanks.
If you plan on making tons of power by converting to electronic fuel injection, you want to make sure your engine is getting the fuel it needs to perform how you want. Whether you are trying to put down some good numbers at the drag strip, doing autocross and track days, or just some spirited driving on backroads. This all new In-Tank 400 LPH EFI Fuel Pump Assembly from CJ Pony Parts is a great addition for building a high performance EFI fuel system!
This fuel pump module is designed to work with CJ Pony Part's EFI fuel tanks (FT18 and FT19) which have a special reservoir tray pre-installed in the fuel tank. This reservoir tray is essential for fuel injected applications to prevent the car from fuel starving under hard acceleration and cornering.
EFI Fuel Pump Features and Benefits:
- Genuine high-performance Walbro fuel pump
- Up to 400 Liters per hour of fuel flow
- Supports engines from 500-1,000 horsepower
- Operating pressure of 0-100 psi
- In-tank wiring harness included
- Heavy-duty, 10-gauge mounting plate to prevent warping
- 1/4" NPT supply and return line
- Barbed vent fitting
- Oven brazed fittings
- Made in the United States of America
Using a high performance Walbro fuel pump supporting 500-1,000 horsepower and pumping fuel to the motor at 400 liters per hour, this EFI fuel pump module will make sure your high performance car is getting the fuel it needs when you put the pedal down. This in-tank EFI fuel pump assembly contains the correct fittings for the supply line, return line, vent and electrical connector. The mounting plate is made from heavy, 10 gauge metal to prevent potential warping, and has a yellow-zinc plated finish to prevent corrosion. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included with this EFI fuel pump assembly for a complete setup.
Please Note: This fuel pump module is to be used in EFI fuel tanks FT18 and FT19, which are available at CJ Pony Parts.
*Gasket and screws with O-rings not sold with pump, they are included in the EFI fuel tanks.
If your vehicle isn't performing well and is using more fuel, it might be something with your fuel system, which is vital to getting fuel to the engine and keeping your car running well. Oftentimes, there are two culprits within the fuel system that can stop fuel from getting to your engine – the Fuel Pump and Filters may need replaced. CJ Pony Parts has these parts and can help you get your restoration back on the road in no time.
Order this In-Tank 400 LPH EFI Fuel Pump Assembly for use with EFI Fuel Tanks from CJ Pony Parts today!
Product ReviewsWrite a review
Do you sell this hanger separately without the pump? Would prefer using the Aeromotive pump over the Walbro. Thanks.
You Might Also Like
CJ's Low Price:$465.99
CJ's Low Price:$474.99
Regular Price: $54.99
Special Price: $52.24