EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks

CJ's Part Number: FSU45
CJ's Low Price:
$35.00
1480896000 63223
Pair the new EFI Fuel Tank Sending Unit with an EFI Fuel Tank for your 1965-1968 or 1969-1970 Mustang!
CJ's Low Price:
$235.00
Qty
CJ's Low Price:
$225.00
Qty
Earn 35 RPM Points What's this?
EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks
EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks Play EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks Video 1

Product Description

EFI 73-10 OHM Fuel Tank Sending Unit for use in EFI Fuel Tanks.

Are you doing a Restomod on your classic car and looking to finish up your EFI system? The last thing you might have thought about picking up for your fuel system is a new fuel sending unit. Look no further than CJ Pony Parts! This all new EFI 73-10 OHM Fuel Tank Sending Unit is just the thing you need for wrapping up your electronic fuel injection system.

Fuel Tank Sending Unit Features and Benefits:
- Zinc coated finish for corrosion resistance
- High quality ceramic board rheostat
- Can be used with original, factory-style fuel gauges
- Works with 6-24 volt systems
- Fits fuel tanks from 6-24 inches deep
- Cut to fit, instructions for fitting included
- Includes mounting screws (5)

This EFI fuel tank sending unit has a universal design which can be cut to fit fuel tanks ranging from 6 to 24 inches deep; instructions for cutting are included. Only reading resistance to ground, the fuel sender unit works on all 6-24 volt systems with positive or negative ground. The rheostat is made from high quality ceramic board, and the fuel sending unit itself is zinc plated to be more resistant to corrosion. For easy installation, the sending unit is supplied with a total of five mounting screws which are used to secure the base of the unit to the fuel tank.

Please Note: This fuel tank sending unit is to be used in EFI fuel tanks FT18 and FT19, which are available at CJ Pony Parts.

*This fuel tank sending unit is a replacement for the original unit that comes in the EFI fuel tank kits FTKEFI1 and FTKEFI2.

If your vehicle isn't performing well and is using more fuel, it might be something with your fuel system, which is vital to getting fuel to the engine and keeping your car running well. CJ Pony Parts has these parts and can help you get your restoration back on the road in no time.

Order this EFI 73-10 OHM Fuel Tank Sending Unit for use in EFI Fuel Tanks from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fuel Sending Units  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 128.05ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 142.1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

EFI Fuel Tank Sending Unit 73-10 OHM For EFI Fuel Tanks Video Transcript
By Bill Tumas: We’re here with a fuel tank sending unit fitting your 1965 through 1970 Mustang with an aftermarket EFI tank. If you're running an EFI conversion in your 1965 through 1970 Mustang and are using one of our EFI conversion tanks, this is going to be the correct sending unit to fit that tank and work with your factory gauges. This reads 73-10ohmages like the factory one and will fit directly into our EFI tank. It includes the sending unit, the float, the hardware and the gasket for installation. Everything is zinc coated to protect against corrosion. This sending unit is available individually, but it's also available in our EFI Fuel Tank Kits.