Eibach Anti-Roll Kit with a 1-1/8" Front Sway Bar and a 5/6" Rear Sway Bar for all 1967, 1968, 1969 and 1970 Mustangs with a Small Block Engine.If you feel your handling and suspension is lacking and want to upgrade your 1967, 1968, 1969 or 1970 small block Mustang with an anti-roll kit, complete the suspension upgrade with this great Eibach Anti-Roll Kit with a 29mm Front Sway Bar and a 21mm Rear Sway Bar for all 1967-1970 Mustangs with Small Block Engines. As your vehicle begins to turn, the body will roll, transferring weight to the outside of the wheels and this results in front end understeering. This is a dangerous result that can cause your Mustang to want to keep going straight and the next thing you know, you're out of control!
With the addition of new, more rigid anti-sway bars, body roll and understeer can be greatly reduced, resulting in a safer, more balanced suspension and more controlled handling. Order your Eibach Anti-Roll Kit today here at CJ Pony Parts and fine tune your Mustang’s handling with new sway bars that have improved design and increased stiffness over your stock sway bars.
OE Front Sway Bar Specifications:
- Diameter of Bar: 18 mm (0.7 in) Solid
- Measured Bar Rate: 21 N/mm (122 lbs/in)
- Bar Weight: 2.7 kg (6 lbs)
Now, look below at the drastic difference that the new Eibach front and rear sway bars bring to the game!
Eibach Front Sway Bar Specifications:
- Diameter of Bar: 29 mm (1.13 in) Solid
- Measured Bar Rate: P1 = 86.67 N/mm (495 lbs/in)
- Bar Weight: 4.5 kg (10 lbs)
Eibach Rear Sway Bar Specifications:
- Diameter of Bar: 21 mm (0.8 in) Solid
- Eibach Measured Bar Rate: 15.7 N/mm (89.5 lbs/in)
- Eibach Bar Weight: 4.31 kg (9.5 lbs)
These high quality sway bars are manufactured from cold-formed, high strength aircraft grade steel. The precision hi-tensile steel alloy and tempered and shot-peened processes afford a long lasting, durable and reliable performance in your 1967-1970 Mustang with a small block engine. These new, sturdy sway bars come with all the necessary hardware, brand new bushings and OE end links. These are precision forged ends that are accompanied with OEM style, pressed bushing locators. After following the included instructions and performing this bolt-on installation, you’ll feel the improved handling and drastically reduced body roll.
This Eibach Anti-Roll Kit with a 29mm Front Sway Bar and a 21mm Rear Sway Bar for all 1967, 1968, 1969 and 1970 Mustangs with Small Block Engines will provide increased handling and improved cornering grip in any performance-driving and everyday situation. Order yours from CJ Pony Parts today and start enjoying the confidence that comes with a stronger, more stable feeling suspension and handling system in your Mustang!
Product ReviewsWrite a review
Hi there, is this a true bolt-on upgrade, or do I need to modify anything on my stock car (drill holes, etc)? Thanks, Ben.
I HAVE FACTORY SWAY BARS FRONT AND REAR. WILL THIS REAR BAR ATTACH TO MY EXISTING MOUNTING PLATES AND USE THE EXISTING TAPS IN MY FRAME? 1970 MACH1, 351C ENGINE, ALL STOCK
You Might Also Like
CJ's Low Price:$129.99
CJ's Low Price:$118.99
CJ's Low Price:$55.99
This sway bar kit from Eibach can do a great job of decreasing body roll on your '67-'70 Mustang. It includes a replacement front sway bar and a replacement rear bar along with all necessary hardware, including polyurethane end links and mounts. The front bar's going to be a 29mm diameter, the rear's going to be 21. To give you a comparison between a factory front bar, I'd say this is 29. The factory front bar you can have is only 18mm. This will have 495 foot pound per inch rate versus 122 for the stock bar. Obviously you can do a much better job of planting your Mustang on the road.
This sway bar kit from Eibach is a great way to decrease body roll and increase handling on your '67-'70 Mustang.