Pair of Eibach Front Pro-Kit Performance Springs for all 1967, 1968, 1969 and 1970 Mustangs with a Small Block V8 Engine.
Are you disappointed with the stance and handling capabilities of your 1967-1970 Mustang? If so, Eibach has the solution for you and your Mustang. Pro-Kit springs are now available for the front of classic Mustangs from Eibach that will wake up the suspension on your Mustang. For the classic Mustang owner looking to stray from strictly restoration parts, this pair of Eibach springs is the solution. Don't wait to order your pair of springs from CJ Pony Parts today!
- Lowers car approximately one inch in the front
- Improved handling and lowered stance
- Lower center of gravity
- Stop faster, corner easier
- Progressive Spring Design for Excellent Ride Quality
OE rate: 45 N/mm (257 lbs/in)
OE Camber = -0.3 deg (+/-1.3 deg)
Pro-Kit progressive rate: 69 - 91 N/mm (394 - 520 lbs/in)
OE Caster = -1.0 deg (+/-1.0 deg)
OE Toe = 0.25 deg (+/-0.75 deg)
PRO-KIT Camber = -0.3 deg
Pro-Kit Caster = -1.0 deg
Pro-Kit Toe = 0.25 deg
Pro-Kit wheel center to fender: 577 mm (22.7 in)
Pro-Kit can be aligned to OE Specs: Yes
*Pro-Kit spring rates are measured as a system of front or rear suspension. 10mm of bump-stop deflection is included in the final rate of the system.
*These springs are designed for Mustangs with a small block V8 engine only.
These front Eibach Pro-Kit springs are ideal for street driving and daily driving. The reason for this being that these springs lower your Mustang enough for a noticeably different stance and improved handling. These springs are not too aggressive for street driving yet they yield substantial enough gains that the owner will feel.
Pro-Kit precisely lowers your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.
Every Eibach Pro-Kit is designed and tested by suspension engineers and performance driving professionals to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using this proprietary, progressive spring design, Pro-Kit Performance Springs provide the ultimate balance to take your passion for driving to a whole new level.
Order a Pair of Front Eibach Performance Pro-Kit Springs for your 1967, 1968, 1969 or 1970 Mustang with a Small Block V8 Engine from CJ Pony Parts today!
Product ReviewsWrite a review
What end of spring faces up?
Will these fit a 1966 mustang convertible? Other sites have the same eibach number for 64-70, your site says 67-70.
You Might Also Like
CJ's Low Price:$161.19
CJ's Low Price:$599.99
Regular Price: $131.99
Special Price: $105.59
Regular Price: $120.99
Special Price: $102.84