AMK Products Master Engine Fastener Kit for 1964-1/2 Mustangs with a 260 or 289 Engine Equipped with a Generator and Air Conditioning.This Master Engine Fastener Kit from AMK Products includes 141 total pieces of factory correct, OE style fasteners that are required to properly reassemble the engine components which attach to the long-block on your 1964-1/2 Mustang's 260 or 289 engine. This kit is specifically assembled for all 1964-1/2 Mustangs with a 260 or 289 V8 engine equipped with a generator and air conditioning.
AMK Products' Master Engine Fastener Kit includes individually packaged sets of hardware for various applications on your 1964-1/2 Mustang's 260 or 289 engine. Each package is thoroughly labeled so you know exactly where it goes on your small block engine. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the included fasteners are either meticulous reproductions of the originals or new old stock!
Master Engine Fastener Kit Includes:
- Air Cleaner: Stamped Wing Nut (1)
- Air Cleaner Heat Shroud: Hex Collar Stud, Nut, Flat Washer (3)
- Carburetor: Studs, 7/16" Nuts (8)
- Crank Pulley: Hex Place Bolts (3)
- Crankshaft Damper: Hex Bolt, Flat Washer (2)
- Distributor: Hex Screw/Split Washer Assembly (1)
- Distributor Points and Condenser Single: Slot Pan Head Machine Screws (3)
- Distributor Vacuum Unit: Slot Pan Head Screws (2)
- Engine Block Drain Plugs: External Hex Pipe Plugs (2)
- Engine Fan: 3-3/4" Hex Screw/Split Washer Assembly (4)
- Exhaust Manifolds: Lock Tabs, Hex Bolts "F", Flat Washers (40)
- Fuel Pump: Hex Screw/Split Washer Assembly (2)
- Ignition Coil Strap and Bracket: Hex Screw/Split Washer Assembly, Hex Washer Head Screw, Hex Nut (3)
- Intake Manifold: Hex Screw/Flat Sealing Washer Assembly (12)
- Oil Pan: Special Hex Screw/Split Washer Assembly, Hex Screw/Conical Spring Washer Assembly (22)
- Starter: Hex Washer Head Screw/Split Washer Assembly (2)
- Engine ID Tag: Hex Bolt (1)
- Timing Cover: Hex Flange Bolts (6)
- Steel Valve Covers: Special Hex Screw/Split Washer Assembly (12)
- Water Neck: Hex Screw/Split Washer Assembly (2)
- Aluminum Water Pump: Hex Flange Bolts, Hex Bolts, Split Washer (10)
Buying individual sets of engine hardware for your 1964-1/2 Mustang's 260 or 289 V8 engine can be expensive and time consuming if you're not sure which hardware you need. This Master Engine Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1964-1/2 Mustang with a 260 or 289 engine equipped with a generator and air conditioning. With a Master Engine Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1964-1/2 Mustang's 260 or 289 V8 engine is going to be reassembled with the finest factory correct hardware on the market!
AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!
*This kit will also fit the early 221 V8 engines.
*Not for use on 221, 260 or 289 V8 engines without air conditioning.
*Not for use on 289 HiPo engines.