Driver Side Rear Fender Splash Shield for 1965-1966 Mustangs.When installing new fenders, you will need new splash shields to seal out water and debris. This reproduction splash shield is located behind the front wheel on the fender. Comes in a metal, black painted body with attached stapled rubber seals.
Product ReviewsWrite a review
Fender Splash Shield Rear Driver Side 1965-1966 is rated out of 5 by 1.
Rated 5 out of 5 by 37plus5 from Stopped water leakage My '66 lacked the front and rear splash guards. The result water in the passenger compartment. I bought all four splash guards from CJP. The quality was good and so was the fit/finish. This job would have been much simpler with the fenders off, but that was not the case. Front splash guards are simple to install. The rears take some effort to ensure they seal well. But all the fixturing holes lined-up and once I sealed the body to guards and sprayed undercoating the end result works well and look pretty stock.
Date published: 2015-11-21
You Might Also Like
By Bill Tumas: We’re here with a splash shield kit fitting all 1964 and 1966 Mustangs. The four piece splash shield kit mounts inside your front fender wells to keep water from splashing up into your engine bay. It includes both rear splash shields, both front splash shields, as well as the necessary installation screws. We offer the splash shields in complete kit form and we do offer the individual splash shields, as well as the hardware, which are all sold separately.