Rear Fender Splash Shield for 1967-1968 Mustangs.When installing new fenders, you will need new splash shields to seal out water and debris. This reproduction splash shield is located behind the front wheel on the fender. Comes in a metal, black painted body with attached stapled rubber seals.
Similar Mustang PartsMore Mustang Splash Shields
I got these for driver and passenger side. They are good quality and will last for a long time. I had to re-drill three holes on each side as they were out by half an inch. Also, the tab that has the hole to attach to the fender at the top will need to be bent to fit your car better. This only added ten minutes a side and isn't really a problem at all. Once installed they look great.
By Bill Tumas: We’re here with a splash shield kit fitting all 1967 and 1968 Mustangs. Splash shields are going to mount in your front wheel wells in front and back of your front tire. Our kit includes both of the rear splash shields, as well as the front splash shields, including both the metal plates, as well as the rubber seals, and a complete set of screws for installation. Our splash shield kit gives you everything you need for installation, although the splash shield, as well as the installation hardware, which are sold separately.