Fidanza Flywheel Aluminum 157T 28.2 Oz & 50 Oz 5.0L 1986-1995

Fidanza: 186501
MSRP: $466.61
CJ's Low Price:
$369.99
1417132800 26487
Earn 369 RPM Points What's this?
MTF71

Product Description

Fidanza 157T Aluminum Flywheel with 28.2 Oz and 50 Oz Balance for 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995 Mustangs with a 5.0L Engine.

Fidanza's 157T aluminum flywheel includes both 28.2 Oz and 50 Oz balances to match whatever engine combination you have. This high quality flywheel is built with premium components for maximum durability and performance. The 16-1/2 lb flywheel is professionally assembled and ready for installation. A replaceable friction plate will save you money in the long run.

Fidanza flywheels are constructed from 6061 T6 aluminum which results in a flywheel that is 40%-60% lighter than the stock flywheel. The light aluminum flywheel reduces rotational mass, delivers faster throttle response, frees up additional horsepower, reduces wear and stress on the engine rotating assembly and increases fuel economy. 6061 T6 aluminum has an ultimate tensile strength of at least 42,000 psi and a yield strength of at least 35,000 psi with great heat transfer ability. The body is CNC machined with a tolerance of +/- .001".

A 1050 steel ring gear is pressed onto the outside of the lightweight aluminum flywheel body and redundantly secured with grade 8 button screws for added strength. The ring gear is heat treated and Rockwell hardened for durability. A 1050 steel replaceable friction plate sits on the face of the aluminum flywheel body. The incredibly strong heat treated friction plate is milled to meet Fidanza's high specifications and pickled and oiled to deliver superior longevity and disc engagement. When it's time for a new clutch, simply replace the friction plate with a new one and avoid resurfacing or full replacement costs.

Fidanza's flywheels utilize military grade aerospace fasteners and feature mechanical, self-locking nuts with built-in washers for reliability and strength. All hardware locations are engineered for optimal clamp load and function. Friction plate hardware even aids in pulling excess heat away from the clutch face to increase longevity and performance. Grade 8 button screws, in addition to an interference press fit, ensure the ring gear is solidly connected. Once the pressure plate is installed, stepped dowels become locked in place and cannot come out. Finishing off the installation of hardware is high temperatue/high viscosity 620 Loctite.

Similar Mustang Parts

similar mustang parts More Mustang Flywheels & Flexplates  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review