Fifteen52 Front Cup Spoiler Kit for 2013-2014 Focus STs.Fifteen52's Front Cup Spoiler Kit is a exterior modification to make the front of your 2013-2014 Focus ST even more aggressive. The kit includes two durable OE quality urethane pieces that are designed to enhance the trademark original look of the Focus ST's front bumper.
Aggressive is the name of the game with Fifteen52's Front Cup Spoiler Kit. Fifteen52 merely exaggerating the Focus ST's front end. They took design cues and made them even more aggressive while effectively extending the front bumper to equal the same depth as the factory side skirts. This eliminated the "reverse rake" appearance.
Spoiler kits come primed and ready for paint but may require prepping, priming and painting prior to installation. All necessary mounting hardware is included. Mounting is simple and maintains the factory driving lights and grilles.
Fifteen52 debuted their Project ST Focus "TrackSTer" at the 2013 Chicago Auto Show. The front lower cup spoilers were such a popular modification on the car that Fifteen52 decided to manufacture sets for the public.
Product ReviewsWrite a review
If you have an SE and want to change to this bumper, where can you find the required mounting units/hardware to do this?
will these fit a 2016 model st 3
What color does this ship in?
Do these effect ground clearance? I have a bone stock '14 ST and going up and down steep driveways can be a challenge.
Will it fit a 2014 se sedan? Can any st front bumper fit a regular focus?
Will this fit the 2015 SE hatchback?
Does this fit 2016 Focus ST?
Will this fit 2013 se sedan
You Might Also Like
CJ's Low Price:$1,649.52
CJ's Low Price:$790.00
CJ's Low Price:$384.99
Regular Price: $249.99
Special Price: $224.99
CJ's Low Price:$96.99
We're going to put a few pieces of the supplied double- stick tape pretty much along this groove here, a piece across here, another piece here, and 1 going up this way. Before I do that, we'll give this surface just a quick clean off with some alcohol. You need to remove the factory T30 Torx Bit located here, and you're going to replace it with the included one, which is longer to fit the new cup spoilers. We'll also clean the surface of the car with some rubbing alcohol, just where the tape's going to go. Remove the backing from the double-stick tape. We're going to start with the back corner. Make sure you pull it away from the body until you get it up into place, and then push down on the tape. Now, we'll install the supplied screw back in the factory location. Repeat the process on the other side, and installation's finished.