Product DescriptionDriver Side Long Front Floor Pan for 1965-1970 Mustangs.
This heavy gauged stamped steel floor pan starts behind the seat platform and extends forward to the floor to firewall extension. Measures 38-3/4" x 24".
Note: This floor pan has the outside lip bent down which is proper for a convertible. Coupes and fastbacks were bent up. You can either bend it up or remove it and seam weld the pan to the rocker.
- Overall Rating: 5 / 5
- 2 Reviews
As someone who's fairly inexperienced in the art of bodywork and attempting to perform the most crucial fix for first-generation Mustangs, this piece replaced the rusted out area perfectly after a bit of trimming along the transmission tunnel side, and it cost a good deal less than what the full-length floor pan would have. The only issue I had was with the downward turned lip on the rocker side of the panel, which is difficult to bend (a testament to this panel's strength) to the upward position (for coupes) if you're like me and don't have an arsenal of metal fabrication tools at your disposal. Other than that, very pleased with the way my new floor pan turned out.
It is a good reproduction and is a good thick metal
You Might Also Like