Floor To Firewall Extension Passenger Side 1965-1970

CJ's Part Number: M126R
CJ's Low Price:
$35.99
1472342400 23245
Make sure you get the driver side floor to firewall extension too!
CJ's Low Price:
$35.99
Qty
Earn 35 RPM Points What's this?
Floor To Firewall Extension Passenger Side 1965-1970
Floor To Firewall Extension Passenger Side 1965-1970 Play Floor To Firewall Extension Passenger Side 1965-1970 Video 1

Product Description

Passenger Side Floor to Firewall Extension for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs.

If you're restoring a vintage 1965-1970 Mustang, then you know firsthand that the old metal parts of your Pony are probably pretty rusty. The floor pans and firewall are especially susceptible to this, so it's important you replace these parts. This Passenger Side Floor to Firewall Extension is just what you need to help make your Mustang's floor rust-free and more stable than before.

Features & Benefits:
- Connects the Bottom of Your Mustang's Firewall to the Floor Pan
- Fits on the Passenger Side
- Measures 18" x 22"
- Made of Sturdy Sheet Metal

Measuring 18" x 22", this Passenger Side Floor to Firewall Extension will connect the bottom of your firewall to your floor pan. It's sometimes called a "toe board," and it'll help increase the stability of your Mustang's floor. Soon enough, you'll be riding around with rust-free floors, and installing this Floor to Firewall Extension will put you one step closer to doing just that!

Please Note: This Floor to Firewall Extension will require slight modifications to fit 1967-1970 Mustangs.

CJ Pony Parts is a great place to find just about any of the Mustang sheet metal you might need to finish a build or perform a quick repair!

Order a Passenger Side Floor to Firewall Extension for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Firewall Assemblies  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Floor To Firewall Extension Passenger Side 1965-1970 is rated 3.75 out of 5 by 4.
Rated 4 out of 5 by from stamping a little off Did not line up with the floor pan. the stamping of the grooves are off a little compared to the replacement floor pan purchased from the cj pony. Had to cut and modify to fit correctly against the trans tunnel and bend the down turned tabs to make fit. But compared to the alternative of having to fab a working panel this is golden, lol.
Date published: 2016-04-06
Rated 3 out of 5 by from Not a great fit Was about 1 short at the side where it needed to be spot welded.cut a piece to size then welded to the floorpan and it now fits great
Date published: 2015-11-26
Rated 5 out of 5 by from Quality Produce Quick shipping, excellent product, thickness of metal is good.
Date published: 2015-12-20
Rated 3 out of 5 by from average quality aftermarket panel. builder quality Good for making patches. Lacking in accurate detail.
Date published: 2015-12-11
  • 2016-08-28T07:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_M126R, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 9.99ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 147.15ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Floor To Firewall Extension Passenger Side 1965-1970 Video Transcript
By Bill Tumas: We’re here with a passenger side floor to firewall extension fitting your 1965 through 1970 Mustang. The floor to firewall extension is also known as the toe-board, and is a commonly rusted out part in your 1965 through 1970 Mustang. This piece is going to extend from the front of your floor pan, up to your firewall. If you happen to have a leaking cowl, many times the bottom panel will get rusted out. This will fit '65 through '70. Will require modifications though for a 1967 through 1970, or, any 1965 through 1966 that had a torque box added. When installing this on a vehicle with torque boxes, you're just cutting out the floor to firewall extension around the torque box so you don't have metal stacked on metal. It shouldn't cause condensation or rust in the future. Matching driver side is also available.