Flowmaster Stainless Steel Force II Axle-Back Exhaust Kit for 2005, 2006, 2007, 2008, 2009 and 2010 GT and 2007, 2008 and 2009 Shelby GT500 Mustangs.
Everyone knows that the 2005-2010 GT and 2007-2009 GT500 Mustangs can produce a wonderful sounding exhaust note. But the stock exhaust limits so much of the exhaust flow that you don’t get that true Mustang sound everyone knows and loves. So replace the stock exhaust with a Flowmaster Stainless Steel Force II Axle-Back Exhaust Kit from CJ Pony Parts!
Flowmaster Force II Axle-Back Exhaust Kit 817410 Features and Benefits:
- Mandrel Bent 16 Gauge Stainless Steel
- True bolt-on installation
- Moderate Exhaust Note
- Dyno Tuned for Maximum Performance Increase
- Includes Hangers and Hardware
- No welding required
- Made in the USA
Flowmaster has constructed the Force II Axle-Back Exhaust Kit from mandrel bent 16 gauge stainless steel for maximum flow and durability. This axle-back exhaust replaces the rear mounted mufflers from the rear axle back and produces a deep, moderate exterior exhaust note with a mild interior noise level. The exhaust system has been dyno-tuned to produce maximum performance, improve throttle response, and improve fuel mileage. With its true bolt-on design and included exhaust hangers and hardware, the Force II exhaust kit is easy to install and requires no welding.
When you're looking for an exhaust for your 1964-2014 Mustang, every owner needs to check out Flowmaster's exhaust systems and mufflers. Flowmaster is a manufacturer of just about any part you need for your Mustang's exhaust, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for their distinctive 'Flowmaster sound,' which is available in mild, moderate and aggressive tones, so you know you can find the perfect muffler or exhaust system for your Mustang.
Order this Flowmaster 817410 Stainless Steel Force II Axle-Back Exhaust Kit for your 2005, 2006, 2007, 2008, 2009 or 2010 GT or Shelby GT500 Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Axle Back Exhaust Kits
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$553.97
CJ's Low Price:$599.99
CJ's Low Price:$599.99
Alex: Thank you for having me Bill. How are you doing today?
Bill: I'm doing good. We all know the two chamber Flowmaster. If you had a Fox Body back in the day you had some Flowmasters on it. But what else can you tell us about your company?
Alex: Well, Flowmaster is an aftermarket performance exhaust manufacturer, Bill, that started off on the racetracks. Ray Flugger, the founder of the company, designed mufflers for racers that were being hammered for excessive noise limits. Flowmaster presents that opportunity where you're able to reduce those dB levels without having to hurt or kill performance. Flowmaster is also one of the most significant speed parts of all time where we are actually an innovative product different from the standard that's out there.
Bill: The two chamber Flowmaster that was the original product he was selling out of a suitcase.
Alex: The 40 Series, except with some slight modifications on the case itself. Back then it was a square case and now it's more of a round oval.
Bill: The other mufflers you have here, what can you tell me about them?
Alex: Here we have a 50 Series Delta Flow to the far right, which is a three chamber design, a little more subdued, a little mellower for those that are looking for less interior resonance. In the middle here we've got a Super 40, which is a two chamber design, a little thicker, a little wider, which is set up to handle higher output applications. To the far left we've got a Super 44, which is the latest and greatest two chamber design that Flowmaster has released in recent years.
Bill: Is that still based off of the original design?
Alex: That is correct.
Bill: I know Flowmaster has a lot of kits available for the 2005 and newer Mustangs. What can you tell me about these two kits you brought with you today?
Alex: Well, Bill here we've got a Force II exhaust system from Flowmaster. It's a direct bolt on axle back 409 stainless steel with a limited lifetime warranty, fully constructed here in the U.S. It's got the rolled edge stainless steel tip with the nice four inch diameter. All of the hardware, everything you need, is included within the kit so you don't have to buy any additional accessories.
This would probably take you an hour and a half to install out of your own garage on a weekend. Very subdued, very mellow kind of tone, something designed for someone who's looking for more of a performance aspect with a little bit of rumble, nothing too wild, nothing too crazy.
Over here on the right we've got the Outlaw System. The Outlaw is very noticeable, very aggressive. It's the 'hear me from a mile away' type of sound, something I would only recommend to those who are fully aware of what they're getting. It utilizes an Outlaw race muffler, basically a muffler that was designed for race applications that are required to run mufflers without a specific dB limit. Again, I only recommend it to those that are looking for the aggressive tone from Flowmaster. It is fully built out of stainless steel, lifetime warranty as well.
Bill: The Outlaw is available for '05 and up for both the 5.0 liter and the 4.6 liter cars?
Alex: That is correct.
Bill: We know Flowmaster that has systems that fit all year Mustangs, but I heard you guys are getting in other parts of the exhaust as well?
Alex: That's right, Bill. We actually just released a full line of stainless steel headers, ceramic coated, very high end piece. They look great. It'll compliment the rest of your exhaust components. We also just released a full line of catalytic converters, both 49 state and carb certified.
Bill: If you're looking for that classic Flowmaster sound, it doesn't matter what year your car is, Flowmaster has a system that will fit your Mustang.