Flowmaster Cat Back Exhaust Force II 2.5" Stainless Steel With 3" Tips Kit V6 1999-2004

Flowmaster: 817275
MSRP: $750.58
CJ's Low Price:
$579.99
Ships from Manufacturer Item will ship directly from the manufacturer1397865600
Earn 579 RPM Points What's this?
CBFF12
CBFF12 Play Flowmaster Cat Back Exhaust Force II 2.5

Product Description

Flowmaster 2.5" Stainless Steel Force II Cat Back Exhaust Kit with 3" Tips for 1999-2004 V6 Mustangs.

This Force II exhaust system has been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.

This system is a true bolt-on kit that includes a Scavenger Y-pipe assembly featuring a pair of legendary Super 40 Series mufflers for the famous Flowmaster 2-Chamber sound. Includes detailed instructions and all necessary hardware for an easy at-home installation.

Product Reviews

Write a Review
Great exhaust for your V6 Mustang.
If you love to hear that chambered exhaust tone then this exhaust from Flowmaster is the one you need on your V6. The sound from it is great, especially around 3000RPM. Noticeable at idle to make your car sound more aggressive. The install wasn't too bad if you have someone helping you hang it. It bolts rightt up to your factory Y-pipe. I had the benefit of using a pit at a local oil lube, but jacking your car up by the frame is a must to wiggle your exhaust through. And it hangs perfectly under your stock V6 bumber. Overall, I would rate this exhaust a 5 star and highly recommend it to everyone.
Adam C. March 11, 2012
Nice but not too loud
This system will give your V6 a nice sound at idle and mild excelleration. Let it tach out and you ain't foolin anybody into thinking its a V8 under your hood. Overall very easy to install but if you change your bumper to a GT like I did you'll have to rebend the brackets to fit up into the exhaust cut-outs.
Bill March 8, 2012
2 Results

Product Video

By Bill Tumas: Bill: We have a special guest in our studio today. Alex, the regional sales manager from Flowmaster, is here to tell us about the company. Alex thanks for coming.

Alex: Thank you for having me Bill. How are you doing today?

Bill: I'm doing good. We all know the two chamber Flowmaster. If you had a Fox Body back in the day you had some Flowmasters on it. But what else can you tell us about your company?

Alex: Well, Flowmaster is an aftermarket performance exhaust manufacturer, Bill, that started off on the racetracks. Ray Flugger, the founder of the company, designed mufflers for racers that were being hammered for excessive noise limits. Flowmaster presents that opportunity where you're able to reduce those dB levels without having to hurt or kill performance. Flowmaster is also one of the most significant speed parts of all time where we are actually an innovative product different from the standard that's out there.

Bill: The two chamber Flowmaster that was the original product he was selling out of a suitcase.

Alex: The 40 Series, except with some slight modifications on the case itself. Back then it was a square case and now it's more of a round oval.

Bill: The other mufflers you have here, what can you tell me about them?

Alex: Here we have a 50 Series Delta Flow to the far right, which is a three chamber design, a little more subdued, a little mellower for those that are looking for less interior resonance. In the middle here we've got a Super 40, which is a two chamber design, a little thicker, a little wider, which is set up to handle higher output applications. To the far left we've got a Super 44, which is the latest and greatest two chamber design that Flowmaster has released in recent years.

Bill: Is that still based off of the original design?

Alex: That is correct.

Bill: I know Flowmaster has a lot of kits available for the 2005 and newer Mustangs. What can you tell me about these two kits you brought with you today?

Alex: Well, Bill here we've got a Force II exhaust system from Flowmaster. It's a direct bolt on axle back 409 stainless steel with a limited lifetime warranty, fully constructed here in the U.S. It's got the rolled edge stainless steel tip with the nice four inch diameter. All of the hardware, everything you need, is included within the kit so you don't have to buy any additional accessories.

This would probably take you an hour and a half to install out of your own garage on a weekend. Very subdued, very mellow kind of tone, something designed for someone who's looking for more of a performance aspect with a little bit of rumble, nothing too wild, nothing too crazy.

Over here on the right we've got the Outlaw System. The Outlaw is very noticeable, very aggressive. It's the 'hear me from a mile away' type of sound, something I would only recommend to those who are fully aware of what they're getting. It utilizes an Outlaw race muffler, basically a muffler that was designed for race applications that are required to run mufflers without a specific dB limit. Again, I only recommend it to those that are looking for the aggressive tone from Flowmaster. It is fully built out of stainless steel, lifetime warranty as well.

Bill: The Outlaw is available for '05 and up for both the 5.0 liter and the 4.6 liter cars?

Alex: That is correct.

Bill: We know Flowmaster that has systems that fit all year Mustangs, but I heard you guys are getting in other parts of the exhaust as well?

Alex: That's right, Bill. We actually just released a full line of stainless steel headers, ceramic coated, very high end piece. They look great. It'll compliment the rest of your exhaust components. We also just released a full line of catalytic converters, both 49 state and carb certified.

Bill: If you're looking for that classic Flowmaster sound, it doesn't matter what year your car is, Flowmaster has a system that will fit your Mustang.