Flowtech Long Tube Headers 1-1/2" Primaries Black 260/289/302 1965-1970

Flowtech: 12102FLT
MSRP: $171.95
CJ's Low Price:
1490486400 13065
Earn 169 RPM Points What's this?
Flowtech Long Tube Headers 1-1/2" Primaries Black 260/289/302 1965-1970

Product Description

Flowtech Black Long Tube Headers with 1-1/2" Primaries for all 1965-1970 Mustangs with 260, 289 or 302 Engine.

FlowTech Headers are precision engineered and leak tested to get maximum performance and fuel economy from your engine. Each header is formed from specially selected .049 cold roll flash controlled tubing, and features FLOWTECH's exclusive, thick, mandrel formed Power Plenum collector. All ports are precisely fitted and finished with sturdy, leak proof O-ringed port seals, and all FlowTech Headers include all mounting hardware including bolts, nuts and premium gaskets. FlowTech Headers feature a high-quality, electrostatically applied satin black paint finish.

*A custom made intermediate pipe/h-pipe is required.

Similar Mustang Parts

similar Mustang parts More Long Tube Headers  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Flowtech Long Tube Headers 1-1/2" Primaries Black 260/289/302 1965-1970 is rated 2.7 out of 5 by 3.
Rated 5 out of 5 by from Perfect If you're using a stock starter, these work perfectly. I swapped a 302 into my '66 and these slipped right in exactly as advertised. I used stage 8 header bolts because the ones that come with it are less than amazing.
Date published: 2015-04-29
Rated 2 out of 5 by from didn't get all the bolts. I called them was a smooth call but still no bolts. Also the starter I have won't fit with the headers.
Date published: 2015-03-05
Rated 1 out of 5 by from Wrong description These are way to long for a car ( 70 fastback), they actually come about one inch of the floor making driving impossible. That's for the left one, since the right one won't even go in hitting the steering pump and other stuff on the way. Terrible product.
Date published: 2016-03-23
  • y_2017, m_3, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_EXHD9, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 15.92ms

Product Questions

Are these the same as part number exhd9 as shown in your t5 Conversion video. .want to make sure the clutch cable clears like in the video

Asked by: 347g
Answered by: CJPP Dave
Date published: 2016-09-22

Will these bolt up to the MagnaFlow 2-1/2 inch exhaust kit?

Asked by: Grinder
No, they will NOT "bolt up". The Magnaflow kit requires some welding no matter what headers you are running. Please watch the installation video on the Magnaflow Kit, it will give you a better idea as to what all needs done to install this kit with just about any set of long tube headers.
Answered by: CJPP Dave
Date published: 2015-11-03

will thay tit a 67 mustang with power steering an 4 speed

Asked by: nuts for mustangs
Wouldn't see why not, as long as you meet the other qualifications listed in the description.
Answered by: CJ Pony Parts
Date published: 2015-11-01

Probably not but will these fit into a 77 Maverik (302). If not, which haders would you recommend for this car?

Asked by: Wally the snake
  • y_2017, m_3, d_24, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_EXHD9, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.56ms

You Might Also Like