Ford Cowl Grille Cover OEM 1983-1993

Ford: E3ZZ-6102228-A
CJ's Low Price:
$101.99
In StockOrders placed today will ship tomorrow1405987200
Earn 101 RPM Points What's this?
CC20
CC20 Play Ford Cowl Grille Cover OEM 1983-1993 Video 1

Product Description

Ford OEM Replacement Cowl Grille Cover for all 1983-1993 Mustangs.

The cowl grille tends to fade and crack after years of exposure to the elements. Replacing the cowl grille is an inexpensive way to give a fresh look to the cowl area.

Add new wiper arms to complete the refreshed look.

Similar Mustang Parts

similar mustang parts More Mustang Cowl Area  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Ford Cowl Grille Cover OEM 83-93 A++++
This grille cover fit like a glove - excellent finish. I went with this Ford product because I simply insist on using Ford manufactured parts for my Mustangs. It took me less than 15 minutes to remove the wiper arms and the 6 screws that held down the old grille. Very, very easy installation and the results are outstanding.
Manny Saenz March 9, 2012
1 Results

Product Video

By Bill Tumas: The cowl grille is one of those parts on a Fox Body that simply doesn't hold up real well. The black plastic tends to fade, and over time they also tend to crack. For years, your only option for finding a good one was to scour the classified or hit up your local swap meet. Today, high quality reproduction is a phone call or click away. Today I'm going to show you how to replace it using this 1990 Mustang convertible.

While the rest of our convertible is in really good shape, the cowl is typical of an older Fox Body. We've got some cracks on the edge here. The entire thing is dated. It's time for a new one. The installation is very straightforward; the only tool required is a Phillips head screwdriver.

We're going to start by removing our wipers. We're going to lift up on the arm and pull this little tab out, rest the arm against the tab, and slide the wiper off. Now we'll remove the six screws that hold the grille on: two here, two in the middle, and two on the other side. Once we remove the screws, the grille will just lift straight off. We're going to reach underneath and disconnect the washer nozzle hose. Before you throw your old grille away, you want to make sure you get the washer nozzle off of it. You'll need that for your new grille.

We'll install the nozzle on our new grille, and it's ready to install. Before we install the new grille, we're going to clean up this area and replace these screw retainers as well. Easy way to get these out is to push them through and pull them out from the bottom.

We'll install the new screw retainers, and press down and click them into place. Now we're ready to install the new grille and reconnect the washer nozzle. We're going to tighten these down snug; you don't want to over- tighten them, since you're tightening into plastic. Now the last step is to reinstall our wipers. We'll line them up, tilt them forward again, push the clip down, and release. And our installation's finished.

A few minutes of work made a huge difference on our convertible. Installation should take you no more than about 10 minutes. You'll be back on the road in no time.