Pair of Ford Red 10th Anniversary Cobra Door Panel Cups for all 1999, 2000, 2001, 2002, 2003 and 2004 Convertible Mustangs with Power Windows.
A common area of wear for 1999-2004 Mustang owners is the interior door panel cup. This is typically used to open or close the doors so these parts experience a lot of wear and tear. Interiors are usually forgotten in the Mustang world, unfortunately. You can change this trend by ordering this pair of Ford door panel cups from CJ Pony Parts. This pair comes in the corred red 10th Anniversary Cobra finish. Don't wait to replace your factory door panel cups with these Ford parts!
- Ford replacement parts
- Fits 1999-2004 convertible Mustangs
- Correct 10th Anniversary Cobra red finish
- Easy installation, no modifications necessary
- Sold as a pair
This pair of door panel cups is offered right from Ford and come in the correct 10th Anniversary Cobra Red finish. This pair of door panel cups will fit all 1999-2004 Mustang convertibles. These door panel cups install like the originals, with no modifications being necessary to complete the installation.
Please Note: This pair of door panel cups will fit all 1999-2004 Mustang convertibles, however the red finish is only correct for 2003 10th Anniversary Cobra Mustangs.
The Ford Mustang consists of thousands of different parts. Throughout every generation of the car, the Ford Motor Company has made many of their Mustang parts internally, meaning if you're looking to replace a part on your Mustang, there's no better source than the OEM parts from Ford. CJ Pony Parts offers hundreds of parts from Ford for all years of Mustang, so you should have no problem finding exactly what you need.
Order a Pair of Ford 10th Anniversary Cobra Red Door Panel Cups for all 1999, 2000, 2001, 2002, 2003 and 2004 Convertible Mustangs with Power Windows from CJ Pony Parts today!
Product ReviewsWrite a review
Do you have door panel cups in red for a 2002 gt
Will this pair fit a 2003 mustang COUPE?
You Might Also Like
Regular Price: $419.99
Special Price: $377.99
Regular Price: $75.99
Special Price: $53.19
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.