Ford Driver Side Charcoal Door Panel Cup for all 1999-2000 Convertible Mustangs with Power Windows and Door Locks.
Replace your 1999-2000 Convertible Mustang's worn out or damaged driver side door panel cup with this OEM Ford part. This all new Driver Side Door Panel Cup comes in a charcoal color that matches the factory charcoal interior color. The insert features accurate locations for the factory power window and door lock switches.
Over the years, the clips that hold the door panel cup in place takes a lot of abuse and are often damaged from constant use. If your door panel insert feels loose inside the door and looks a little rough around the edges, this new Door Panel Cup is a great way to get your 1999-2000 Mustang's interior looking fresh and new!
- Fits 1999-2004 Mustangs
- Charcoal Finish
- Mounting Clip Included
- Anti-Rattle Foam
- Correct Color for 1999-2000 Mustangs
The Ford Mustang consists of thousands of different parts. Throughout every generation of the car, the Ford Motor Company has made many of their Mustang parts internally, meaning if you're looking to replace a part on your Mustang, there's no better source than the OEM parts from Ford. CJ Pony Parts offers hundreds of parts from Ford for all years of Mustang, so you should have no problem finding exactly what you need.
Purchase a new Ford Driver Side Charcoal Door Panel Cup for all 1999-2000 Convertible Mustangs with Power Windows and Door Locks from CJ Pony Parts today!
Product ReviewsWrite a review
Does this come in other colors?
What colors are avalible
I need a driver side door panel for 1997 mustang convertible equipped with power windows. Color saddle (tan)
need the center console door like the glove box door that opens up Mine
do you carry gray?
Do you carry the left door cup for a 1999 convertible mustang in grey?
Do you carry any in medium parchment which is the same as gray?
You Might Also Like
Regular Price: $75.99
Special Price: $60.79
Door cups are going to be available for your coupe or convertible in all the factory colors, including the black, tan, saddle, as well as the charcoal we'll be installing on 2001 Bullet. The installation is very simple of these OEM products and we're going to show you how to do it.
Typically the only tool you're going to need to install the door cups is going to be a Phillips-head screwdriver. We're going to start by removing it right here. I do want to make a point of mentioning that if this part of your door panel is damaged, then replacing the door cup's probably not going to fix your issue. You may need a whole new door panel. Typically though, these are okay and the door panel's a problem, simply push down here and pull out. Now there's normally a clip back here. This is another common area these things break. In the case of our Bullet, this is where this one's broken off at.
Going to flip the door cup over, remove the two screws holding our window switches in place. Then pop the clip for the mirrors. The nearest switch is held to the door cup by this little push pin. Simply just push this pad in and slide it through. I'm going to lift it back first and then push it through. Take the window switch. It will just pop right into place on our new door cup. We'll install the switch assembly. Plug in the mirrors. At this point, test everything. Make sure the mirrors are working. Make sure that the door lock works. Don't worry about the windows. If the lock works, if the windows weren't before, they're going to work now as well.
Now what you'll want to do is line this clip up with this opening in the back here and then push the door panel cup into place. That's all there is to it. Repeat the process if you're replacing the passenger side, and you're all finished. Replacing the door cups in your SN95 Mustang not only improvements the function of the door but it also looks a hack of a lot better without the door cup falling off. Installation's very simple, like I said. The only tool required is a Phillips-head screwdriver. Take about five minutes per side and you'll be back on the road in no time.