Ford Performance 28 Spline Driveshaft Slip Yoke for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a C-4, AOD or T-5 Transmission.
Tighten up the drivetrain on your 1965-2004 Mustang by picking up this 28 Spline Driveshaft Slip Yoke from Ford Performance. Specifically designed for C-4, AOD and T-5 transmissions, Ford Performance's M-4841-B driveshaft yoke will easily replace your original to ensure no more sloppy performance from your Mustang's driveshaft.
Features & Benefits:
- OE Style Replacement
- Fits 28-Spline Output Shafts
- Uses 1330 U-Joints
- Cast Steel Construction
- Outer Diameter of 1.5"
- U-Joint Cap Diameter of 1.062" with a width of 3.5"
- Made in the USA
This driveshaft slip yoke is designed to be an OE-style replacement for on your Mustangs. Fitting 28-spoline output shafts, the yoke has an outer diameter of 1.5" and uses 1330 U-joints. Its cast steel construction is built to last and can help increase your horsepower by reducing any drivetrain weight on your Pony. Completely made in the USA, this slip yoke also features a u-joint cap diameter of 1.062" with a width of 3.5".
*This driveshaft yoke is specifically designed to work with C-4, AOD and T-5 transmissions only.
When you purchase items from Ford Performance (formerly Ford Racing) at CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination!
Purchase Ford Performance's M-4841-B 28 Spline Driveshaft Slip Yoke for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a C-4, AOD or T-5 Transmission from CJ Pony Parts today!
Similar Mustang PartsMore Driveshafts, Slip Yokes & U-Joints
Product ReviewsWrite a review
will this work on a 1968 V8 mustang with a C4 tranny?
Does this yoke fit a 1966 mustang 4 speed, did not see one for a four speed if this one will not fit do you sell one that will fit
Will this slip yoke fit a 1965 c4?
Can you give me the measurements of this slip yoke? length, width, diamiter, Thanks
will this transmission yoke fit my FRPP driveshaft? This is for a 2003 Cobra with a live axle from a 2001 Mustang GT
bought this yoke it states it will replace mine, have a 72 mustang and now has a t5 trans and my driveshaft takes a smaller u joint than the yoke .cap seems to fit but jount isn't wide enough . is ther one that I canget to work?
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$89.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$329.95