Ford Performance "GT350R" Rear Seat Delete Kit for all 2015, 2016 and 2017 Fastback Mustangs.
If you have no use for a rear seat and you are in the market to shed some weight by deleting your rear seat, take the time to consider this "GT350R" Rear Seat Delete Kit (P/N M-6346612-M) from Ford Performance!
This Rear Seat Delete Kit from Ford Performance is original equipment that is found on all 2015-2017 GT350R Mustangs. It will fit all Fastback 2015-2017 V6, EcoBoost, GT and GT350 Mustangs and requires no permanent modifications. The kit includes all necessary rear seat delete interior trim panels and installation hardware to easily complete the race-inspired GT350R look in your S550. Whether you are trying to achieve a certain look in your interior or drop a few pounds, the "GT350R" Rear Seat Delete Kit from Ford Performance will be right at home with its OE fit and finish in your 2015-2017 Fastback Mustang.
Included in Kit:
- (1) FR3Z-6360508-A Rear Seat Delete Panel
- (2) W701125-S424 Screw
- (2) FR3Z-63116A66-A Support
- (1) FR3B-6331048-ACW Right Hand Seat Belt Cover
- (1) FR3B-6331049-ACW Left Hand Seat Belt Cover
- (1) 10144 Plastic Push-in
- (6) 4521020 M10x20 Flange Bolt
- Detailed Installation Instructions
*Installation procedure is best done in a warm environment to avoid the possibility of fracturing any interior trim panels.
Please Note: The Ford Performance Rear Seat Delete Kit requires removal of the factory rear seat belts and all safety restraints. The intended purpose of this kit is to offer a weight savings while still providing a factory interior feel. This Kit is not engineered to provide a safe and secure seat for passengers or cargo.
If you're looking for parts for your Mustang, you should start by looking at the more than 750 Mustang parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance Mustang parts from CJ Pony Parts, you know you have a winning combination.
Manufacturer Part Number: M-6346612-M
Order this Ford Performance "GT350R" Rear Seat Delete Kit for your 2015, 2016 and 2017 Fastback Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Rear Seat Deletes
Product ReviewsWrite a review
I'm interested in purchasing the rear seat delete kit for my '17 GT350, but was hoping that it's available for "will-call" pick up in Michigan. I checked with Ford Performance and they suggested that I ask the retailer I want to purchase it through.
You Might Also Like
CJ's Low Price:$899.00
CJ's Low Price:$399.95
Regular Price: $99.99
Special Price: $94.99
First step in the process, obviously remove our factory seat. We'll start by removing the seat bottom. To remove the rear seat, reach under the center here, there's a little tab, just push it in and it'll pop right up. Now for the back seat rest, we're going to start with the nuts on each side. Now release the seat, pick that up and then slide it off the center. Both sides out now we can move on to the middle bracket. Since we're removing the back seat we don't need the seat belt either so we're going to remove those. To get the rest of the seat belt out we got to remove the plastic quarter trim panels. We're going to start in the front by removing the dorsal plate. To remove the dorsal plate they lift up from the bottom, the little clip off and we're going to start pulling the panel off, it's all held on by clips.
Now you're going to remove the top of the seat belt. With everything out the way we can get access to the packing tray and underneath we're going to remove these two torque screws to remove the factory brackets. With those out of the way, the last step for removal is to remove the seat cushion brackets on both sides. With the backseat out you're going to reinstall the side panels and the package tray. Now we're ready to begin the installation itself. Ford performance provides these bolts, they're going to go in these holes where the brackets with just removed. Ford provides these spacers that make sure the seat doesn't move around. They're going to stick to the floor so what we're going to do is take a little rubbing alcohol first to make sure we got a nice clean surface. Remove the adhesive and stick it down.
The rear seat delete will require us to drill two holes in the partial shelf that access to the bolt holes from the bolts that were removed earlier for the rear seat latches. What we're going to do now put the seat delete in the car, figure out where it's going to sit so we can drill those holes. The bottom section of seat is held in by the supplied push pin, it's going to be a tight fit, put that in, that'll get everything lined up and we can punch the holes in the back. Tailoring should get it lined up, it's going to fit one way, then drill through the package tray. I'm going to use the supplies bolts, go through and thread it in. Now with everything bolted up the last part of the installation install the supplied covers for the seat belt latches.
It was truly an honor for Ford to choose CJ Pony Parts to build this car for their Ford Performance display at this year’s SEMA show. With high quality Ford Performance parts along with high quality parts from Anderson's Composites and COBB we built the Mustang that we are truly proud of. If you're lucky enough to be attending this year’s SEMA show be sure to check Ford display and come check out our Mustang.