Ford Performance By Borla Stainless Steel Sport 2-1/4" Axle-Back Exhaust Kit with 4" Chrome Exhaust Tips for all 2015, 2016 and 2017 EcoBoost Mustangs.
Chances are, the first thing you will notice when you bring your new 2015-2017 EcoBoost Mustang home from the dealership is how quiet it is. Although you can still tell there is a 2.3L EcoBoost engine under the hood, the factory exhaust note leaves something to be desired.
Ford Performance introduces their brand new Sport Axle-Back system by Borla for all 2015-2017 EcoBoost Mustangs to help solve this problem. Manufactured out of T-304 Stainless Steel with 2-1/4” Mandrel Bent Inlet Pipes and 4” Chrome Plated Exhaust Tips that are embossed with the Ford Racing logo, Ford Racing’s new Sport Axle-Back by Borla will not only look great but will give you that aggressive and throaty sound that every new 2.3L EcoBoost Mustang should have.
Features and Benefits:
- Full Stainless Steel Construction
- Chrome plated 4” Exhaust Tips
- 49 State Drive-by Noise Legal
- Ford Racing Logo Embossed on each Exhaust Tip
- 2-1/4” Mandrel Bent Tubing Inlet
- Straight Through Design with No Drone
- Aggressive and Throaty Sound
- Reuses Stock Exhaust Hangers and Mounts
- Includes All Necessary Hardware and Instructions for Installation
*Installation requires cutting of the factory exhaust piping. Once the modifications have been made to the factory exhaust system, Installation is a simple bolt-in procedure.
*Not legal in the state of California.
With its full stainless steel construction and a set of 4" chrome exhaust tips embossed with the Ford Racing Logo, you will surely be treating your new s550 Mustang to the best Ford Performance Parts has to offer.
By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you are getting your parts from a reliable, reputable dealer. CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for years! When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination of quality and reliability in your purchases.
Order a Ford Performance by Borla M-5230-M4SC Sport Axle-Back Exhaust System for your 2015-2017 EcoBoost Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Axle Back Exhaust Kits
Product ReviewsWrite a review
Where can i do the installation of this exhaust and how much will be installation fee ?
Is this S type borla ?
Hi, I want to order exhaust for mustang ecoboost.I am from belgium and which shipping method do I do best,is not urgent but that I have to pay any extra cost. Sorry for my spelling. Thanks , greetings. Nico
Does Ford offer aftermarket exhaust to increase the sound of the 2015 mustang 3.7 V6?
This will fit any EBoost model including convertibles?
You Might Also Like
Ford Performance By Borla Axle-Back Exhaust Kit 2-1/4" Touring Stainless Steel With 4" Chrome Tips EcoBoost 2015-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$789.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$574.99
The Ford Racing by Borla exhaust will require you to cut your factory tail pipes for installation. It features two and half-inch mandrill bent pipes into a set of Borla stainless steel mufflers and as set of Ford Racing four-inch chrome tips.
Well start off with a sound clip of that factory EcoBoost exhaust. Definitely the sound we're used to for a mustang. Let's see how our Ford Racing by Borla sounds.
For this instillation, need a lift or a jack and jack stands, 3/8 ratchet, 15 millimeter deep socket, sawzall and safety glasses.
On all the 2015 Mustangs, your entire rear exhaust system is going to be welded. So, right here you can see this is where you would normally think an Axle-back would go. Ford weld it here and welded it further up. If you're going to install an Axle-back, you do have to cut. This system here, we're just going to follow the curve right the flat part and that’s where we're going to cut.
I just made a little mark to give me an idea of right where the curve stops and that’s where we're going to cut.
We’re going to remove the factory muffler for the hanger. Make sure you grab the correct muffler, they are size specific. Put the clamp over it.
Start by putting it up into the hanger. Make sure you get it centered, then tightly clamp down. Then repeat the process on the other side.
The install wasn't bad at all. More importantly let's see how it sounds.
Definitely a deeper tone than the factory exhaust. It's got a little bit of raspiness to it but over all, absolutely, an improvement over the factory mufflers. Now. let's take it for a ride with our new exhaust system. When you fire it up the first the first thing you hear, it's got a little bit of a deeper tone. It's not a lot louder. You definitely don’t hear it as much in the cabin but it's definitely is a deeper tone when you fire it up. Soon as you're revving, you can definitely tell it's a after market exhaust.
The Ford Racing sport Axle-back gave a nice sound to our EcoBoost Mustang and I bet when they have the after market down put for this car it's going to sound even better. Instillation was pretty straight forward. Probably going to take you around a half an hour, you'll be back on the road in no time.