Ford Performance Control Pack with Speedometer Adjuster Speed-Dial Wiring for use with the 2011, 2012, 2013 and 2014 4V 5.0L Coyote Crate Engine.
For the lucky owner of a 2011-2014 5.0L Coyote Engine looking to swap it into another Mustang, we have something that will help you with the project! This control pack harness replaces the stock body harness and is designed to work on any vehicle other than a 2011-2014 Mustang. This control pack will work on either an automatic or manual transmission. If your transmission is an automatic it must not have a PCM to control the transmission. Included is wiring to hook up a Ford Performance Speedometer Adjuster Speed-Dial.
-OBD-II Diagnostic Port to Assist in Vehicle Calibration Upload and Problem Diagnosis
-Electronic Throttle Control Accelerator Pedal
-PCM with Ford Racing Calibration
-MAF Sensor with Bolts
-Unique Downsized Power Distribution Module
-Speedometer Adjuster Speed-Dial Wiring
*PCM with Ford Performance calibration requires return type fuel system, will not work with return less fuel system.
*Installation of this PCM in a 2011-2014 Mustang GT will result in a no-start condition
This control pack has everything needed to run the 2011-2014 Coyote engine. The accelerator pedal is electric eliminating the throttle cable, preventing it from getting damaged under the engine bay. This wiring harness also includes an OBD-II port allowing you to diagnose the problems that might occur when finished with your project. You will be able to properly dial in your speedometer with the included wiring for a speedometer adjuster speed-dial.
If you're looking for parts for your Mustang, you should start by looking at all of the Mustang parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years!
Order a Ford Performance M-6017-A504VA Control Pack with Speedometer Adjuster Speed-Dial Wiring for use with your 2011, 2012, 2013 or 2014 4V 5.0L Coyote Crate Engine from CJ Pony Parts today!
Similar Mustang PartsMore Computers & Programmers
Product ReviewsWrite a review
Can I take out the pcm in my 4r70w to use this?
I have the motor and trans from a 2013 mustang gt that I'm putting in my 05 v6. Is this what I need to get it to start up?
I have a 2013 V6 mustang that its engine had blown and driveshaft heavily damaged; doing a coyote swap is this what is necessary as well as what other items is essential to this project?
Have an empty 55 F100 would this pack help get a donor 2011 5.0 engine/trans (auto) up and running
I'm doing a restomod using a 2013 5.0 and would like to throw either a Kenne Bell or Ford Racing/Whipple supercharger on the engine. Is this possible with this control pack?
Will this controll a 4 speed automatic 4r75w
Hi, will this be the correct harness to run the coyote crate Aluminator NA 5.0, using the T56 out of a 03 cobra, will this speed control pack work with the 03 T56 Trany. I also would like to run a E-Force Super charger, can the pcm be recalibrate for this
I am performing a restomod using a 5.0 from A 2013 mustang. Will this wiring run my engine?
You Might Also Like
CJ's Low Price:$949.00
CJ's Low Price:$298.99
CJ's Low Price:$262.99