Ford Performance Crate Engine 5.0L 4V Coyote 435HP Mustang

Ford Performance More Parts from Ford Performance Truck Freight Shipping Applies
Ford Performance: M-6007-M50A
MSRP: $7,875.00
CJ's Low Price:
$7,400.00
Lift Gate Required: Choose 'Yes' if you will need lift gate service. Choose 'No' if you have a loading dock for truck freight delivery.
1490400000 62006
Add this part to your order to go along with your new crate engine!
CJ's Low Price:
$1,749.00
Qty
Earn 7400 RPM Points What's this?
Ford Performance Crate Engine 5.0L 4V Coyote 435HP Mustang
Ford Performance

Product Description

Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine.

This all-new, all-aluminum Ford Performance 2015-2017 5.0L Coyote crate engine is a modern 5.0L 32-Valve DOHC V8 that uses advanced features to deliver a whopping 435 HP @ 6500 RPM and 400 ft-lb.+ TQ @ 4250 RPM on premium fuel. This is achieved using features such as Twin Independent Variable Camshaft Timing (Ti-VCT) which allows the timing of the camshafts to adjust during different RPM intervals for optimum performance output.

This lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance. This Ford Performance Crate engine will also fit most newer and older Mustangs, even models going all the way back to 1965!

435HP 5.0L Crate Engine Specifications:
- High-Performance, 5.0-Liter Four-Valve Ti-VCT V8 Engine
- 435 Horsepower @ 6500 RPM / 400 ft-lbs of Torque @ 4250 RPM
- Displacement 302 Cubic Inches
- 11.0:1 Compression Ratio
- Hypereutectic Aluminum Pistons
- Forged Steel Connecting Rods
- Forged Steel Crankshaft
- Aluminum Block
- 8qt Capacity Oil Pan
- Tuned Composite Intake Manifold Provides Efficient Air Delivery and Weight Savings
- 80mm Single Bore "Drive By Wire" Throttle Body With Variable Runner Control
- Aluminum Cylinder Heads, DOHC, Four Valves Per Cylinder, Variable intake and Exhaust Camshaft Timing
- Mustang GT 409 Stainless-Steel Tubular Exhaust Manifold On The PASSENGER SIDE ONLY
- Includes Manual Transmission Engine Harness and Flywheel

Actual Engine weight: 444 lbs.

*A vehicle harness and PCM is not included. Use Ford Performance's new wiring, PCM and installation kit (M6017504V) designed for street rod or project car installation.
*Does not include an alternator, use Ford Performance's alternator kit (M8600M50BALT).
*Does not come with engine covers, use Ford Performance's 5.0L engine cover kit (M9680M50A).

Tech Tip: Engine mount bosses and bell housing mount pattern common to 4.6L modular engines.

By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. We believe that offering top quality products such as Ford Performance crate engines validates our commitment to helping our customers get the most pleasure and satisfaction from Mustang ownership.

Order a Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine from CJ Pony Parts today!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 19.11ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Will this fit in a 2015 V6 convertible? 

Asked by: cabchappy
It would physically fit but not a direct fit, it would be a custom installation that would require all of the sub systems to be replaced or modified.
Answered by: rk cjpp
Date published: 2017-03-03

Will this motor work in a 1995 cobra svt convertable?

Asked by: swatteam64
It would physically fit but would not be a direct bolt in.
Answered by: rk cjpp
Date published: 2017-02-17

I have a 2010 Mustang v6 4.0 I can change the engine for the coyote 5.0?

Asked by: Titi87
It would not be a direct swap, all of the sub systems, cooling, fuel, exhaust, electrical etc. would have to be modified or changed.
Answered by: rk cjpp
Date published: 2017-02-15

is this motor ready to install, long block?? will the motor fit in an 86 mustang gt?? thank

Asked by: mustang5
For this engine to work in your 86 mustang you would need a control pack, http://www.cjponyparts.com/ford-racing-crate-engine-5-0l-4v-coyote-435hp-mustang/p/M6017504V/, a k-member for a modular engine, Ford Performance's alternator kit (M8600M50BALT) and a transmission that will work with the coyote/modular engine. The instructions with the engine will explain what fuel system requirements you will need, the cooling and exhaust systems will need to be modified.
Answered by: rk cjpp
Date published: 2017-02-02

I have a 1997 Thunderbird. I am pretty sure the engine will fit without issue. The Thunderbird has a 4.6 and the information above indicates the bell housing will fit. Will the existing wiring harness work? Will I need to change or upgrade the computer?

Asked by: Willy76
You will need the control pack, see P/N: M6017504V
Answered by: CJPP Dave
Date published: 2017-01-18

Would this pass smog for California in a 1995 ford mustang gt v8

Asked by: Gilbert
We don't keep track of the aftermarket part laws in any area, so we'd encourage you to check the list of official approved CARB parts here: http://www.arb.ca.gov/msprog/aftermkt/devices/amquery.php.
Answered by: rk cjpp
Date published: 2016-12-19

How I can get it in Peru?.It could be imported?

Asked by: Leon15
Yes, we ship worldwide. To get a shipping quote and total price, add the item(s) to your shopping cart and then proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area including any import taxes and duties.
Answered by: CJPP Dave
Date published: 2017-03-08

I have recently bought a 67 Mustang Coupe and trying to bring it thebthe 21st century. It's a blank canvas. Can this fit, and what parts will I need to make this an automatic. Is it possible to give me a list of parts, and price estimate. 

Asked by: Entonyous
Yes this will work in your '67, we put one in our '65. Check out our Project 50/30 to see some of the install and what all was necessary. I recommend checking out this transmission, P/N: TRANS44. But you will need several part to make it all work along with a little fabrication.
Answered by: CJPP Dave
Date published: 2016-12-08
  • y_2017, m_3, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_73
  • loc_en_US, sid_M6007M50A, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 10.82ms
  • QUESTIONS, PRODUCT

You Might Also Like