Ford Performance Lowering Springs 1" Set GT Coupe 2005-2014

Ford Performance: M-5300-P
MSRP: $230.00
CJ's Low Price:
1490227200 23743
Earn 203 RPM Points What's this?
Ford Performance Lowering Springs 1" Set GT Coupe 2005-2014
Ford Performance

Product Description

Set of Ford Performance Lowering Springs for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 GT Coupe Mustangs.

If you want to give your 2005-2014 GT Coupe a more aggressive looking stance and increase its handling dynamics at the same time, you should definitely take a closer look at this Ford Performance Set of Lowering Springs, available today from CJ Pony Parts!

Features & Benefits:
- Fits 2005-2010 GT Coupes
- Fits 2011-2014 GT Coupes When Used with Ford Performance's Front Strut Mounts (CJ # M18183C) and Shock/Strut Kit (CJ # M18000A or # M18000C)
- Use with CJ Pony Parts # M18000A, # M18000C and # M5490A for Optimal Performance
- Jounce Bumper Kit (CJ Pony Parts # M5570A) Recommended to Use with These Springs
- For 2005-2010 GTs, CJ Pony Parts # M18183C Strut Mounts are Recommended
- Offers a More Aggressive Looking Stance and Increased Handling Dynamics
- Lowers Mustang About 1.0"
- Progressive Springs

This Set of Ford Performance M-5300-P Lowering Springs will fit 2005-2010 GT Coupes, plus 2011-2014 GT Coupes when it's used with Ford Performance's front strut mounts (CJ # M18183C) and one of their shock/strut kits (CJ # M18000A or # M18000C). For optimal performance, you should use these lowering springs with CJ Pony Parts # M18000A, # M18000C and # M5490A. These springs will lower your Mustang about 1". Also, a jounce bumper kit is recommended for use with these springs, and for 2005-2010 GTs, it's recommended that you use CJ Pony Parts # M18183C strut mounts.

Please Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications. These lowering springs may require alignment after installation.

*These springs may cause a slightly harsher ride compared to your stock springs.

By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years!

Order a Set of Ford Performance M-5300-P Lowering Springs for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 GT Coupe Mustang from CJ Pony Parts today!


Installation Instructions

Mustang Installation

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.6ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions


We do not offer a kit that would meet your specs.
Answered by: rk cjpp
Date published: 2017-03-08

I have a 2011 Mustang GT 5.0 . Do I have to use the 2005-2010 Strut Mounts with these? Or will they work with my 2011 Strut mounts? Also will be doing new shocks and struts like KONI STR or KONI yellow or Bilstein HD's? what is your recommendtation. Than

Asked by: PUGmaster
No, but it is recommended because they are a much better strut mount and chances are your strut mounts will come apart when you disassemble things to install these springs. If you do upgrade to the 05-10 strut mounts, you will have to use 05-10 struts. as far as the struts and shocks that you listed, you can't go wrong with any of those. A lot just depends on your budget. The STR.T are a great performing entry level strut and shock while the Yellow Sports are much improved with adjustability. The Bilsteins HD's are more of the middle ground.
Answered by: CJPP Dave
Date published: 2017-03-07

I have 20" wheels with 275/35ZR20 front and 315/35ZR20 rear Nitto tires. Will this configuration fit with this Lowering Springs. Regards

Asked by: Juan Pablo
That will come down to the offset of your wheels and your alignment settings. You may have to run a steering rack limiter in the front and you will definitely need at least an adjustable panhard bar in the rear but i recommend a watts link. Typically a 275 up front at full steering lock will rub slightly when hitting a bump. But a 315 in the rear has to be on a perfect offset and absolutely centered to have any chance of not rubbing. I've heard of 305/35-20 rubbing when not setup properly, so a 315 may be a challenge.
Answered by: CJPP Dave
Date published: 2017-01-05

Can the m-5300-p springs be installed on a 2013 Mustang GT without the Front Strut Mounts (CJ # M18183C) and Shock/Strut Kit (CJ # M18000A Thanks

Asked by: Pappy12
Yes, but we do at least recommend replacing the strut mounts.
Answered by: CJPP Dave
Date published: 2016-11-23
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_M5300P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 5.72ms

You Might Also Like