Ford Performance 11" Pressure Plate Bolt And Dowel Kit for 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs with a 4.6L Engine or a 5.0L Coyote Swap.
If you’re looking for a Pressure Plate Bolt and Dowel Kit for your 1999-2010 Mustang with a 4.6L Engine with a 6-Bolt Pressure Plate, then look no further than this kit from Ford Performance! If your 1999-2010 Mustang happens to have a 5.0L Coyote Swap with a 9-Bolt Pressure Plate, then this kit is also the perfect option for you. Ford Performance has made it easy and included everything you need whether your 1999-2010 Mustang is rocking a 4.6L Engine or 5.0L Coyote Swap under the hood.
- (6) Dowel Pins Total – (3) For 4.6L Engines, (3) For 5.0L Coyote Engines
- (9) 10mm x 1.5 Pressure Place Bolts For Use With 11” Modular Flywheel
- Detailed Instructions with Proper Torque Specs
If your 1999-2010 Mustang has a 4.6L Engine, then your Mustang has a 6-Bolt Pressure Plate and will only use six out of the nine bolts included in this kit. However, if your 1999-2010 Mustang has a 5.0L Coyote Engine, you will use all nine bolts included in this kit. There are also two different designs of dowel pins used for either the 4.6L or 5.0L Coyote motor, and both are included in this kit for an easy installation.
The hardware included in this kit from Ford Performance also allows for increased clamp load over the stock, OEM bolts for your Mustang. The included instructions will list all proper torque specs so you can ensure everything is installed correctly!
*Dowels are necessary to align and stiffen the pressure plate shell. If the dowels are not used the clutch may chatter and the engine vibrate.
By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Racing Dealer and has been for the last 10 years. When you buy your Ford Racing Mustang parts from CJ Pony Parts, you know you have a winning combination--this means dependable, quality care for your pony car.
Order a M-6397-B46 Ford Performance 11" Pressure Plate Bolt And Dowel Kit for your 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 or 2010 Mustang with a 4.6L Engine or a 5.0L Coyote Swap from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$17.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$36.99
Ford Performance Flywheel Billet Steel 164 Tooth 0 Oz. Balance 4.6 Liter/5.0 Liter With 8-Bolt Crank 1996-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$299.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$12.99
This pressure plate and dowel kit, gives you all the hardware necessary to mount the pressure plate to the 11 inch flywheel, on your 99 through 2010 4.6, or 5.0L Coyote Swap car. Includes the 10 by 1.5 bolts, as well as all six necessary dowels for installation.
For installing an 11 inch clutch, or swapping a Coyote into your 1999 through 2010 Mustang, make sure you pick up this clutch pressure plate and dowel kit.