Ford Performance 8.8" Finned Aluminum Rear Differential Cover With Cooler Ports.
Are you in the market to replace or upgrade your Rear Differential Cover? If so. This finned aluminum cover with cooler ports from Ford Performance is a great solution for the enthusiast that wants to push the limits of performance in his 8.8” solid rear axle housing. Originally found only on the 2013 and 2014 Track Pack Shelby GT500 Mustangs, this cover is an excellent upgrade for the Mustangs owner that expects a high level of dependability even in the most strenuous of driving situations!
This Rear Differential Cover from Ford Performance (formerly Ford Racing) is cast from aluminum and showcases cooling fins to help decrease your gear oil temperature and lengthen the life of your gear and bearings. Because of its finned aluminum design, there will be a slight increase in the strength of your rear end housing. The fluid capacity of your rear end housing will stay unaffected but this cover also features two drilled and tapped cooler ports that have the necessary 1/2-14 NPSF block off plugs installed. These cooler ports are also ideal for use as fill and drain ports. Lastly, another great advantage to this cover is that there is a sealed machined port for a temperature sensor with M10 X 1.6-6h threads.
Features and Benefits:
- OE on 2013-14 Mustang Shelby GT500 with Track Pack Option
- Fits ALL 8.8" Ford Rear End Housings, Except 1999-2004 IRS
- Recommended for Road Racing Applications to Reduce Gear Oil Break Down, Increase Gear and Bearing Life
- Cooling Fins Help Reduce Gear Oil Temperature
- Cover Machined for Differential Cooler Pickup and Return Fittings
- Includes 10 Hex-Head Bolts with Anaerobic Yellow Thread Locking Compound
- Includes 7/16-20 UNF Vent Plug for Applications with Alternative Vent Provisions
- Cover Machined for Temp Sensor with M10 X 1.6-6h Threads
- Will not Fit IRS Differentials or with Differential Mounted Anti-Lock Brake Exciter Ring
*Fits all 1985-2014 V8 and 2011-2014 V6 Mustangs except 1999-2004 Cobra's equipped with IRS (Independent Rear Suspension).
If you're looking for parts for your 1985-2014 Mustang, you should start by looking at the hundreds of Mustang parts that CJ Pony Parts offers from Ford Performance. By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance Mustang parts from CJ Pony Parts, you know you have a winning combination.
Order this Ford Performance M-4033-KA Finned Aluminum Rear Differential Cover with Cooler Ports for your 8.8" equipped Solid Rear Axle Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
The vent in the Ford racing diff cover can be used instead of the one on the axle of my Mustang GT right? The one on my axle is hitting my exhaust because my car is so low. So I would like to take the vent out of the axle and use the one in the cover. thx
You Might Also Like
CJ's Low Price:$209.00
CJ's Low Price:$86.99
CJ's Low Price:$38.99
CJ's Low Price:$25.99
Regular Price: $25.99
Special Price: $18.19
This finned aluminum differential covers the factory cover found on the 2013 through 2014 Track Pack GT 500, but will fit any solid axle 8.8 rear end and is a direct replacement for the factory one. The finned aluminum is going to dissipate heat better, and has these two plugs built into it. On the Shelby these are used for a cooler, which can be added to any 8.8 rear with additional parts. If you're not using it as a cooler this works great as a fill, and then a drain plug as well.
This includes the necessary bolts for installation but will require the use of silicone for install. This Ford Racing differential cover is a low-profile design so it will clear almost all factory and after market panhard bars.