Ford Performance Strut Tower Brace for all 2015, 2016 and 2017 EcoBoost and GT Mustangs.
Enjoy better performance out of your 2015-2017 EcoBoost or GT Mustang's suspension & chassis assembly by ordering this Strut Tower Brace from Ford Performance. Installing this upgrade onto your S550 will let you enjoy smoother handling while seeing a reduction in that annoying suspension flex.
Features & Benefits:
- Created from Stamped Steel
- Parallel Beam Design
- Improves Handling
- Limits Suspension Flex
- Black Powder Coated Finish
- Has a Silver "Ford Racing" Emblem
- Includes Cowl Extension & Hardware
- Made in the USA
*Will NOT fit 2015-2017 V6 Mustangs.
Ford Performance's Strut Tower Brace will decrease the amount of suspension flex that comes from your S550's chassis under the heavy torque from your engine. Crafted from high-quality stamped steel, this strut tower brace has a parallel beam design that adds more rigidity. This design also improves the handling of your 2015-2017 EcoBoost or GT so you can hit the hard turns without much effort. Finished off with a popular black powder coating, this strut tower brace also includes a silver "Ford Racing "emblem plate to further brand your new Pony. Completely made in the USA, Ford Performance (formerly Ford Racing) will also provide you with a cowl extension and the necessary hardware to properly install your new strut tower brace onto your 2015-2017 EcoBoost or GT Mustang.
Please Note: This strut tower brace will NOT fit in your 2015-2017 GT Mustang if you have a Ford Performance supercharger.
If you're looking for parts for your 2015-2017 Mustang, you should start by looking at the several Mustang parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance Mustang parts from CJ Pony Parts, you know you have a winning combination!
Order this Ford Performance M-20201-M Strut Tower Brace for your 2015, 2016 or 2017 EcoBoost or GT Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Shock Tower Braces
Product ReviewsWrite a review
Can this be installed without disconnecting the battery?
Hi i have a 2015 UK Mustang GT, is there any problems with fitting this strut to right hand drive car?
Does this say "Ford Racing" or the newer "Ford Performance" on the strut tower brace emblem? Thanks.
can I buy the ford racing strut brace on its own without the rear part for a 2015 mustang gt.as shipping would be a lot less. also our cars are r.h.d.so they have to be modified to fit just the tower brace.
My Euro spec GT came with the K brace but not the tower to tower brace, where can I get one of them?
Ordering from Canada. Is the cart price in US dollars or CDN? Also, will I pay duty?
Is it possible to buy just the strut tower brace, i.e. the brace that goes over the engine? The cars in Australia come with the K brace.
Ford Racing Strut Tower Brace EcoBoost/GT 2015-2016 , is the original GT-Strut in silver also available? Including Nuts? And what is your price including shipment?
You Might Also Like
CJ's Low Price:$299.00
CJ's Low Price:$298.00
CJ's Low Price:$199.00
CJ's Low Price:$144.00
You have a classic brace that goes here from strut tower to strut tower but also includes an auxiliary brace that goes from the strut tower back to the firewall. Now if you have a performance packed GT, you already have both of these braces from the factory. If you have a performance packed EcoBoost, it does come with the rear brace. This kit will fit all 2015-2017 GT and EcoBoost Mustangs. We're beginning installation by removing these two nuts right here.
You will notice our car is a factory performance pack EcoBoost car so the rear brace came from the factory, we won't have to install that. We're just going to install the one that goes from tower to tower. The passenger side is a little different, you want to pop this clip off first then you can access the nut underneath. To get the brace to under the harness on the passenger side, what we're going to do is move this nut right here. This will give us a little more room to lift the harness up and get it over the brace.
In order to put the brace over here, what you're going to do is go underneath the wiring harness over on this side. To put this in place, reinstall the bolt. The kit does include new nuts for these studs just in case your car did not originally come equipped with the rear brace but since we have a performance pack, we're just going to reuse the original hardware. Get them hand tight then torque them to 41 foot pound. Reinstall the wiring harness, and repeat the process on the other side and your installation is finished.
It was truly an honor for Ford to choose CJ Pony Parts to build this car for their Ford performance display at this year’s SEMA show with high quality Ford performance parts, along with high quality parts from Anderson Composites and COBB. We built a Mustang that we are truly proud of. If you're lucky enough to be attending this year’s SEMA show, make sure you check out the Ford display and come check out our Mustang.