Ford Racing Throttle Body Dual Bore 65mm Aluminum Cobra Jet 2007-2013

Ford Performance: M-9926-CJ65
MSRP: $739.00
CJ's Low Price:
1464393600 24265
Earn 668 RPM Points What's this?
Ford Racing Throttle Body Dual Bore 65mm Aluminum Cobra Jet  2007-2013
Ford Performance

Product Description

Ford Racing Cobra Jet Aluminum 65mm Dual Bore Throttle Body for 2007-2013 GT500 Mustangs.

Ford Racing's Cobra Jet throttle body is validated through hundreds of hours of dyno, racing and street performance driving. The twin bore 65mm throttle body (stock SVT Mustang uses a twin bore 60mm throttle body) features a 1517 CFM rating. Consistent high flow comes from the precision billet construction and tapered inlet. Once machined, the throttle body receives a CNC'd Ford Racing logo and polished finish.

There is no need to tear apart your original throttle body as this is a bolt-on part comes fully assembled with throttle position sensor and actuator motor. Calibration for idle air flow uses the same procedure as production throttle bodies. Testing for cold and hot weather operation is compliant with Ford original equipment specifications. OE gears prevent gear bind and wear which is common with other aftermarket throttle bodies.

Fits in factory location on 2007-2013 Shelby GT500s. Also, fits 2011-2013 GT Mustangs with Ford Racing supercharger kit M-6066-MGT624D.

*Computer calibration is required.
*All CFM ratings are calibrated at 28-inches of water. Measured on SuperFlow SF-1020 Flow Bench.

Similar Mustang Parts

similar Mustang parts More Throttle Body & Accessories  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 161.28ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

would it work on a boss 302 2012

Asked by: boss3022012
No. They are a single round blade.
Answered by: fordprotech
Date published: 2016-05-25

is it match and install on Ford Racing Intake Manifold Cobra Jet GT 2011-2014 ?

Asked by: WJDsnd
Yes, this is one of the throttle bodies that works on the Cobra Jet Intake Manifold.
Answered by: CJ Pony Parts
Date published: 2015-05-18
  • 2016-05-28T08:46CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_M9926CJ65, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 180.67ms

You Might Also Like