Ford Trunk Storage Cargo Net for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs without the Optional Shaker 1000 System.
This envelope style cargo net stretches easily over large items while the braided cording won't scratch finished or painted surfaces. Corner hooks are installed on either side of the trunk for the cargo net to hook on to. The supplied hardware can be installed by hand but a screw driver may be necessary to remove the factory plastic plug to install the threaded hooks. The cargo net can be easily removed when not in use. Simply unhook the ends of the net and store in the corner of your trunk.
- Two thread-in hooks
- Two u-nuts
- Cargo net
Tired of the stuff in your trunk shifting around? Now you can keep all of your things in order. The simple cargo net can be installed and removed within seconds. This cargo net can hold quite a few items as it stretches and expands. Even with the cargo net installed, plenty of trunk space remains for those really large items. After the installation of this cargo net, trips to the grocery store will no longer result in food scattered across your trunk.
*Will NOT work with Shaker 1000 audio system.
Product ReviewsWrite a review
I have a cargo net from a previous Mustang that we had. We just purchased a 2014 Mustang & would like to install this cargo net in it. Can I get the 2 hooks & U clips seperate?
You Might Also Like
CJ's Low Price:$148.99
CJ's Low Price:$84.99
The only tool you'll need for installation is going to be a ratchet and a 13mm socket. You have to remove two bolts to install the factory supplied hardware. We're going to start by removing these two bolts located on either side of your trunk. Your '05 through '09 car may have a push pin there instead. The 2010 and up is definitely going to have a bolt.
Once you remove the bolt, carefully pull down on the carpet and you've got to remove the factory installed u-nut off the stud here. If it doesn't slide off, just grab your car key and push in the center and it will slide right off. Now you'll install the supplied U-nut back on the stud, pull the carpet back over, and now we'll thread on the anchor for our cargo net. Now repeat the process on the other side.
We'll take our cargo net, slide it over the anchor on this side, and do the same with the passenger side and our installation is finished. The cargo net is a simple part, but you'll be amazed how nice it is to have it in the trunk of your Mustang. Installation should only take you around five minutes. You'll be back on the road in no time.