Frame Patch Rt Front At Bumper Brackets 1964-1970FRONT PORTION CONTAINING THE FRONT BUMPER BRACKET MOUNTING NUTS 20
Product ReviewsWrite a review
Frame Patch Rt Front At Bumper Brackets 1964-1970 is rated out of 5 by 2.
Rated 4 out of 5 by 67FastbackMitch from good repair panel Purchased this to fix up the front of my frame under the battery. It fit very well and gets rid of those silly brackets ford used for the capture nuts. Only reason I didn't give five stars is the bottom lip of the panel did not have the same cutout area as the original. It was off by about half inch. Bit I just cut that out and didn't use it. Work perfectly.
Date published: 2015-01-08
Rated 5 out of 5 by CJLO from Quality! Doing some serious frame repair on the 65. And again you can count on CJ to deliver a high quality part for a good price. The steel is of good grade, easy to weld, fit was outstanding!
Date published: 2016-02-27
The frame is rotted on the inside next to the radiator. Does this patch enclose the frame on both sides?
This will only be used on the outer part of the frame where the bumper attaches. Here are the links to the front frame rails that we offer, http://www.cjponyparts.com/frame-rail-left-half-front-29-inner-and-outer-1964-1970/p/M165L/, http://www.cjponyparts.com/frame-rail-rt-half-front-29-inner-and-outer-1964-1970/p/M165R/
Date published: 2016-09-01
You Might Also Like
CJ's Low Price:$102.99
CJ's Low Price:$100.99
CJ's Low Price:$92.99
By Bill Tumas: We're here with a replacement outer frame rail for all 64-70 Mustang Coupe, Fastback, or Convertibles. The outer frame rails are one of our common places that rust due to the mounting and the bumper brackets. Our replacement panel is going to cover the outside of your frame. The panel comes with the nuts pre-welded on for your bumper brackets. Your outer frame patch panel is going to mount from here where your radiator support goes, back to underneath the shock tower. These two bolts we have going through a rotisserie are going through two bolt holes where you would mount your outer bumper bracket. You can use the full length of the patch or cut it to fill any section you need to.