Set of Amber LED Front Turn Signal Bulbs for all 2014, 2015, 2016 and 2017 Chevrolet Silverados.
Regular turn signal bulbs use a standard incandescent light bulb from the factory, while newer luxury vehicles are starting to use LED bulbs. Upgrade the turn signal bulbs in your 2014-2017 Chevrolet Silverado with this Set of Amber LED Front Turn Signal Bulbs from CJ Pony Parts!
LED Front Turn Signal Bulb Set Features:
- Instant On/Off Blink
- Increased Brightness
- Vibrant Color
- Easy Plug-and-Play Installation
Sold as a set of four, these bulbs will do both upper and lower front turn signals on the driver side and passenger side. LED bulbs provide a more crisp, and instant on/off blink than a traditional incandescent bulb. Brightness is greatly increased when using an LED bulb, as well as providing a more vibrant color that will stand out more to other drivers. Installation of this LED bulb set is extremely easy, simply plug the bulbs in, and you’re ready to go.
Please note: LED bulbs use less power and my cause a more rapid blinking due to the vehicle thinking the bulb is out. To fix this, we recommend paring an LED resistor kit (CJ’s part# RESISTKIT) with your new LED bulbs.
With several great options on the market today, CJ Pony Parts stands behind the premium selection of top-notch LEDs available. We offer you just about anything from headlight bulbs to turn signal and marker lights. With the choices that CJ Pony Parts brings to you, you'll have the ability to go from mild to wild and get the most out of your easy to install LED bulb purchase.
Order this Set of Amber LED Front Turn Signal Bulbs for your 2014, 2015, 2016 or 2017 Chevrolet Silverado from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$108.00
Reverse Light Bulb LED Ultra Bright White Pair Chevrolet Silverado/GMC Sierra 2014-2016/Chevrolet Colorado/GMC Canyon 2015-2016/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$85.50
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$51.99
Reverse Light Bulb LED Bright White Pair Chevrolet Silverado/GMC Sierra 1999-2013/Chevrolet Colorado/GMC Canyon 2004-2012/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$36.00
This set of four amber LEDs for the front of this Silverado are going to brighter and they're going to light up faster, making the truck much safer.
Tools you will need for this installation: a quarter inch ratchet, eight millimeter socket, a ten millimeter socket, and an extension.
As you can see on the front of this Silverado, there's two turn signals in each housing, which is why we have four LEDs. Now, to install them, you don't need to remove anything for the driver’s side. Simple just get your hand behind the headlight and remove the bulbs. Small hands will come in handy with this, which I guess I'm out of luck, but on the passenger side you will need to remove the air box and we'll show you how to do that.
This step isn't entirely necessary. We're going to loosen up this bracket to get it out of our way. You don't have to do it to remove anything but it's just going to help us when we install the new bulbs. Now, you only need to loosen up one of these bolts and remove it. You can leave the other one the way it is and then push this bracket out of the way.
Now to get the air box, we're going to disconnect the mass airflow sensor. Loosen up this hose clamp. Then the four screws on each corner of the air box. Remove the clip that's securing the mass airflow sensor harness. Take out the air filter. Three's three tabs in this air box securing it to the air duct. Press those in, and then lift up and pull the air box out of its tabs.
It's basically impossible to show you where the connectors on this headlight without removing the grill, which is very difficult, but this part you're going to need to be able to see with your hands to do these. You're going to get your hand in this hole on this fender. This is the same process on both sides. You’re just going to have to feel where the connectors are for the turn signals. There's one up top and one on bottom. Now, small hands come in really handy with this part.
There's one, and there's two. Once you get the connectors out, installing the new bulbs is very easy. Simply wiggle out the old bulbs, grab your new LED. Now it's time to test the LED. If it doesn't work, simply pull it out, switch it around, and plug it back in.
Now both LEDs are in, we're going to test them out just by hitting the unlock button on the key fob. They both work. Now we can put them back in the housing.
Now you can reinstall the air box. Now install the two bulbs on the other side and your installation is finished.
Our LED turn signals are in. They light up brighter and quicker and they're going to last longer. Installation should take you about thirty minutes and before you know it you'll be heading down the road.