Fuel Pump Pick-Up Bracket EFI 1983-1997

CJ's Part Number: FPU2
CJ's Low Price:
$69.99
1480982400 61292
Purchase the proper fuel pump for your 1983-1997 Mustang listed below.
CJ's Low Price:
$49.99
Qty
Earn 69 RPM Points What's this?
Fuel Pump Pick-Up Bracket EFI 1983-1997

Product Description

EFI Fuel Pump Pick-Up Bracket for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and 1997 Mustangs.

Are you replacing the fuel pump in your 1983-1997 Mustang? While your fuel tank is dropped from your Mustang replace your fuel pump pick-up bracket today. This bracket can collect moisture when in the fuel tank which can accumulate rust making the fuel pump, fuel filter blocked preventing your Mustang from running properly.

Features:
- Direct Replacement
- Steel Construction
- Fits 1983-1997 Mustangs
- For Mustangs with Electronic Fuel Injection
- Correct Connector for Wiring

This is a direct replacement for 1983-1997 Mustangs with electronic fuel injection. This fuel pump pick-up bracket is a factory replacement which is constructed out of high quality steel. The bracket securely holds the fuel pump and fuel pump screen in place when it’s placed in the fuel tank.

Includes:
- Fuel Pump Pick-Up Bracket
- Fuel Tank O-Ring
- Fuel Sending Unit Retaining Ring

Please Note: This Fuel Pump Pick-Up Bracket does NOT Include the Fuel Pump.

The top of the bracket has two hard lines that runs fuel to the engine. One of the hard lines supplies the engine with fuel the other line is a return line that runs fuel back into the tank. The plug on top of the bracket allows the fuel gauge in your dash to properly read when installed.

If your Mustang isn't performing well and is using more fuel, it might be something with your fuel system, which is vital to getting fuel to the engine and keeping your Mustang running well. Oftentimes, there are two culprits within the fuel system that can stop fuel from getting to your engine – the fuel pump and filter should be replaced.

Purchase a new EFI Fuel Pump Pick-Up Bracket for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and 1997 Mustangs from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fuel Injected  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Fuel Pump Pick-Up Bracket EFI 1983-1997 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Good price If you don't buy all in one gas pump the original rusted in to two pices
Date published: 2016-11-07
  • y_2016, m_12, d_6, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_FPU2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 137.18ms
  • REVIEWS, PRODUCT

Product Questions

Can you tell me the OD of feed and return line ? I'm running all braided lines and was going to use compression AN fitting on pickup tube. Thanks alot 

Asked by: Matt84SVO
This takes quick connect fittings to install the lines, I believe the lines are 3/8 and 5/16.
Answered by: rk cjpp
Date published: 2016-01-19
  • 2016-12-06T08:24CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_FPU2, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 128.45ms
  • QUESTIONS, PRODUCT

You Might Also Like