Premium 22-Gallon Fuel Tank Conversion Kit for all 1967-1968 Mustangs.
This Premium 22-Gallon Fuel Tank Conversion Kit comes with everything you need to upgrade from the 16-gallon fuel tank in your 1967 or 1968 Mustang, to the larger 22-gallon fuel tank that is used in 1970 Mustangs. With a Premium 22-Gallon Fuel Tank Conversion Kit, your Mustang will benefit from 6 extra gallons of fuel, which is almost 40% more compared to the factory 16-gallon fuel tank. Now you will be able to avoid those frequent stops at the gas station and finally be able to enjoy longer road trips in your 1967 or 1968 Mustang with peace of mind.
This Premium 22-Gallon Fuel Tank Conversion Kit makes the switch to a larger fuel tank relatively painless and is a smart upgrade for anyone looking to increase fuel capacity. So, if you are running a 4-barrel carburetor or any other type of performance modifications, looking for increased fuel range and security, or just simply tired of filling up your tank so much, this Premium 22-Gallon Fuel Tank Conversion Kit is perfect for your 1967 or 1968 Mustang!
Fuel Tank Conversion Kit Includes:
- Premium 22-Gallon Fuel Tank
- Scott Drake Fuel Tank Sending Unit
- Custom Fuel Filler Pipe
- Scott Drake Fuel Tank Filler Hose
- AMK Products Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe to Body Gasket
- Fuel Tank Filler Screws
The focal point of this conversion kit is of course the Premium 22-Gallon Fuel Tank. This North American made fuel tank is a direct replacement for all 1970 Mustangs, but will fit in any 1967 or 1968 Mustang using the factory mounting locations, without any modifications. The tank has been pressure tested twice to ensure a quality unit. Constructed using original dimensions, the premium tank measures 32-5/8" x 24-1/2" x 9-3/4", with the correct 22-gallon capacity. It comes with a special coating that prevents rust and corrosion. A drain plug is included for easy drainage.
This conversion kit comes with a Scott Drake Fuel Tank Sending Unit that is specific for the 22-gallon fuel tank allowing for accurate fuel level gauge operation. Scott Drake's commitment to service includes inspecting, pressure testing and performing a OHMS test on 100% of their sending units to help assure a trouble free installation. The Scott Drake Fuel Tank Sending Unit features a 3/8" outlet tube and includes a plastic float, O-ring gasket, resistor, mounting plate and filter.
Your 1967 or 1968 Mustang's original filler neck will no longer work with the new 22-gallon tank and must be replaced. That is why this conversion kit includes a custom Fuel Filler Pipe, designed to be a direct bolt-on replacement that lines up perfectly with the neck on the 1970 Mustang's 22-gallon fuel tank. The brand new, high-quality Fuel Filler Pipe is made from thicker steel compared to the original filler pipe found in the 1967 and 1968 Mustangs. It features the correct notch for the gas cap seal to let air in and is designed so that the gas cap fits tight. This Fuel Filler Pipe is improved in every way possible over an original filler neck, but still looks like an NOS part.
Connecting the custom Fuel Filler Pipe to the new 22-Gallon Fuel Tank, is Scott Drake's Fuel Tank Filler Hose. Scott Drake's high-quality filler hose features two red stripes and the name AUTOLITE imprinted for that little extra detail. It is made of a durable, high-quality fuel resistant rubber material. Replacing this hose is always recommended when installing a new fuel tank.
The best part about this conversion kit is the fact that everything bolts up to the factory locations using original hardware. If you don't have original hardware to use, a Fuel Tank Mounting Hardware Kit from AMK Products is included, which comes with all the necessary mounting hardware required to drop in the new fuel tank and secure it. AMK produces the most factory correct hardware on the market.
Please Note: Molded trunk mats will no longer fit properly when a 22-Gallon Fuel Tank Conversion Kit is used because the larger fuel tank will eliminate the hole that the molded trunk mats fit into.
Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!
Order a Premium 22-Gallon Fuel Tank Conversion Kit for your 1967-1968 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
Regular Price: $101.99
Special Price: $76.49
Regular Price: $69.99
Special Price: $55.99
Regular Price: $28.99
Special Price: $20.29