Premium Stainless Steel 22 Gallon Fuel Tank Conversion Kit for all 1965-1966 Mustangs.
This Premium Stainless Steel 22 Gallon Fuel Tank Conversion Kit comes with everything you need to upgrade from the 16 gallon fuel tank in your 1965 or 1966 Mustang, to the larger 22 gallon fuel tank that is used in 1970 Mustangs. With a Premium Stainless Steel 22 Gallon Fuel Tank Conversion Kit, your Mustang will benefit from 6 extra gallons of fuel, which is almost 40% more compared to the factory 16 gallon fuel tank. Now you will be able to avoid those frequent stops at the gas station and finally be able to enjoy longer road trips in your 1965 or 1966 Mustang with peace of mind.
- Scott Drake 22 Gallon Stainless Steel Fuel Tank
- Scott Drake Fuel Tank Sending Unit
- Custom Fuel Filler Pipe
- Scott Drake Fuel Tank Filler Hose
- AMK Products Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe to Body Gasket
- Fuel Tank Filler Screws
The focal point of this conversion kit is of course the 22 Gallon Stainless Steel Fuel Tank. This premium quality fuel tank, from Scott Drake, is a direct replacement for all 1970 Mustangs, but will fit in any 1965 or 1966 Mustang using the factory mounting locations, without any modifications. The tank is constructed of stainless steel and is made using original dimensions, measuring 32-5/8" x 24-1/2" x 9-3/4", with the correct 22 gallon capacity. Stainless steel will last for years to come and keeps a nice appearance which is great for show cars. A drain plug is included for easy drainage. This is the finest fuel tank on the market, period!
This conversion kit comes with a Scott Drake Fuel Tank Sending Unit that is specific for the 22 gallon fuel tank allowing for accurate fuel level gauge operation. Scott Drake's commitment to service includes inspecting, pressure testing and performing a OHMS test on 100% of their sending units to help assure a trouble free installation. The Scott Drake Fuel Tank Sending Unit features a stainless steel construction with a 3/8" outlet tube and uses a brass float. A retaining ring, o-ring gasket and filter are included.
Your 1965 or 1966 Mustang's original filler neck will no longer work with the new 22 gallon tank and must be replaced. That is why this conversion kit includes a custom Fuel Filler Pipe, designed to be a direct bolt-on replacement that lines up perfectly with the neck on the 1970 Mustang's 22 gallon fuel tank. The brand new, high quality Fuel Filler Pipe is made from thicker steel compared to the original filler pipe found in the 1965 and 1966 Mustangs. It features the correct notch for the gas cap seal to let air in and is designed so that the gas cap fits tight. This Fuel Filler Pipe is improved in every way possible over an original filler neck, but still looks like an NOS part.
Connecting the custom Fuel Filler Pipe to the new 22 Gallon Fuel Tank, is Scott Drake's Fuel Tank Filler Hose. Scott Drake's high quality filler hose features two red stripes and the name AUTOLITE imprinted for that little extra detail. It is made of a durable, high quality fuel resistant rubber material. Replacing this hose is always recommended when installing a new fuel tank.
The best part about this conversion kit is the fact that everything bolts up to the factory locations using original hardware. If you don't have original hardware to use, a Fuel Tank Mounting Hardware Kit from AMK Products is included, which comes with all the necessary mounting hardware required to drop in the new fuel tank and secure it. AMK produces the most factory correct hardware on the market.
Finally, a new Fuel Filler Pipe to Body Gasket is included to replace that worn out or missing original. The gasket is made out of cork and sits on the end of the filler pipe which meets the gas cap. A helpful tip; if you put two gaskets on the filler pipe, it helps to move the gas cap away from the tail light panel which helps to keep the gas cap from scratching the paint when it is twisted during opening.
This Premium Stainless Steel 22 Gallon Fuel Tank Conversion Kit makes the switch to a larger fuel tank relatively painless and is a smart upgrade for anyone looking to increase fuel capacity. So, if you are running a 4-barrel carburetor or any other type of performance modifications, looking for increased fuel range and security, or just simply tired of filling up your tank so much, this Premium Stainless Steel 22 Gallon Fuel Tank Conversion Kit is perfect for your 1965 or 1966 Mustang!
Please Note: Molded trunk mats will no longer fit properly when a 22 Gallon Fuel Tank Conversion Kit is used because the larger fuel tank will eliminate the hole that the molded trunk mats fit into.
Similar Mustang PartsMore Fuel Tank Kits
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$129.99
CJ's Low Price:$98.99