Glove Box Liner for 1965-1966 Mustangs.Your glove box liner takes a lot of abuse over the years, replace it today with this new reproduction liner. This new liner comes ready to install with glove box light lens attached.
Product ReviewsWrite a review
Glove Box Liner 1965-1966 is rated out of 5 by 3.
Rated 5 out of 5 by Mustang Tommy from Glove Box Liner What can you say about a glove box liner. It came, it was installed with new screws and it looks good. Just wish it came with a picture showing that you have to fold the sides to make it fit through the opening.
Date published: 2015-05-05
Rated 5 out of 5 by stang66 from perfect fit My glove box liner was completely falling apart. Bought this one to replace it. Easy to install all holes were in location looks great.
Date published: 2015-02-01
Rated 4 out of 5 by Buttons9229 from Good Fit The product fit perfectly. Good replacement for the original that had fallen apart. I also ordered with the mounting screws.
Date published: 2015-05-22
Do you have to remove the heater box to install this. i have air in the car. It looks like it want go in without removing something.
You have to fold glove box in the middle of each side towards center to install it through opening. Then when in place, simply release the folds and expand it to its original shape, then position it and it is ready to be screwed down.
Date published: 2015-11-11
I am having issues with my glove box. Apparently the '66 glove box liner I purchased from you a little well over a year and a half ago was actually for the '64 1/2-'65 models and couldn't be properly fitted into my '66. What should I do?
If this was the product you bought, it will fit your 1966. There were no fitment differences in glove boxes between the 1964.5 and 1966 model years. The only differences were some trim/styling.
Date published: 2015-03-30
Does the 65 Mustang liner also fit the 64 Falcon? Do you have a flocked glove box for 1964 Falcon?
Unless it specifically denotes Falcon fitment, we haven't tested it for the Falcon, so we can't say if it will or won't fit.
Date published: 2015-03-09
By Bill Tumas: We're here with a glove box liner, fitting all 1964 through 1966 Mustangs. This glove box liner is the reproduction of the original liner, which tends to deteriorate over time. It has all the factory mounting holes with the mounting tabs, and even has the cut out for the factory glove box light. With the glove box being the only real storage space in your classic Mustang, make sure yours is usable with one of our glove box liners.