Set of H&R Sport Coil Springs for all 2014, 2015 and 2016 Focus STs.
Reduce that unsightly fender to wheel gap on your 2014-2016 Focus ST with a set of Sport Coil Springs from H&R. H&R's Sport Coil Springs 51664-2 will lower the 2014-2016 Focus ST approximately 1.4" in the front and 1.3" in the rear for that aggressive stance you've been looking for. This set comes with four coil springs, a pair for the front and a pair for the rear.
H&R Sport Coil Springs 51664-2 create a lower center of gravity and reduce body roll for better handling with a progressive spring rate design that provides superior ride quality and comfort, compared to the harsh ride characteristics of other less-advanced coil springs. A lower wind resistance signature will make your Focus ST more streamlined and improve gas mileage.
H&R's springs 51664-2 are created from special 54SiCr6 tempered steel that has a strength rated at 290,000 psi which results in unrivaled tensile strength and resiliency. You won't have to worry about H&R springs settling or sagging as they are designed and manufactured to be strong, resilient and more durable than other automotive coil springs. H&R's springs are shot-peened to increase their life by more than 200 percent. Every spring produced is tested and comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany.
If you are only looking to improve one part of your 2014-2016 Focus ST's suspension, installing H&R's Sport Springs should be the number one choice. Fun to drive, H&R Sport Springs are the perfect upgrade for your Focus ST!
Since the late 1970's, H&R has been developing a diverse line of products and suspension applications for the street. H&R's commitment to producing a quality product allowed them to obtain TUV certification and the European performance spring market was born. All products are made in Germany and exceed ISO quality assurance standards.
Product ReviewsWrite a review
will a 19" rim and tire fit this? was looking at getting the RS wheels you have on here as well. i believe they were 19x8.5
Hi guys, will these H&R springs fit my 2016 Focus ST 250 (Facelift). We cannot get H&R in the UK for the Facelift model so just checking before i go ahed and purchase these for my 2016 Focus ST. Thanks guys Mark
Do I need any additional hardware? Like front and rear endlinks, chamber arms? Ext. Will cause my car to chamber?
Would these fit 2013 st focus
I know these are set to fit an st, but would they fit the se model as well?
Will I need camber plates or bolts for this installation. I'm hoping not
Difficulty to install?
Hello. Are these a confirmed fit for the 2015 model? Thanks.
You Might Also Like
CJ's Low Price:$1,349.99
CJ's Low Price:$1,039.99
CJ's Low Price:$500.00
H&R springs are made in Germany and are known worldwide for their high quality construction. They're made of a high-tensile steel guaranteeing never to sag. This particular kit will fit your 2014 Focus ST. It will lower the front 1.4" and the rear 1.3".
These H&R coil springs are designed specifically for your 2014 Focus ST. Because of a change to the front strut mount they will not fit a 2013.