H&R Coil Spring Sport Set Focus ST 2014-2017

H&R: 51664-2
MSRP: $349.00
CJ's Low Price:
1487980800 44943
Based on your parts selection you might be interested in the parts listed below.
CJ's Low Price:
Earn 243 RPM Points What's this?
H&R Coil Spring Sport Set Focus ST 2014-2017
H&R Coil Spring Sport Set Focus ST 2014-2017 H&R Coil Spring Sport Set Focus ST 2014-2017 Play H&R Coil Spring Sport Set Focus ST 2014-2017 Video 1

Product Description

Set of H&R Sport Coil Springs for all 2014, 2015, 2016 and 2017 Focus STs.

Reduce that unsightly fender to wheel gap on your 2014-2017 Focus ST with a set of Sport Coil Springs from H&R. H&R's Sport Coil Springs 51664-2 will lower the 2014-2017 Focus ST approximately 1.4" in the front and 1.3" in the rear for that aggressive stance you've been looking for. This set comes with four coil springs, a pair for the front and a pair for the rear.

H&R Sport Coil Springs 51664-2 create a lower center of gravity and reduce body roll for better handling with a progressive spring rate design that provides superior ride quality and comfort, compared to the harsh ride characteristics of other less-advanced coil springs. A lower wind resistance signature will make your Focus ST more streamlined and improve gas mileage.

H&R's springs 51664-2 are created from special 54SiCr6 tempered steel that has a strength rated at 290,000 psi which results in unrivaled tensile strength and resiliency. You won't have to worry about H&R springs settling or sagging as they are designed and manufactured to be strong, resilient and more durable than other automotive coil springs. H&R's springs are shot-peened to increase their life by more than 200 percent. Every spring produced is tested and comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany.

If you are only looking to improve one part of your 2014-2017 Focus ST's suspension, installing H&R's Sport Springs should be the number one choice. Fun to drive, H&R Sport Springs are the perfect upgrade for your Focus ST!

Since the late 1970's, H&R has been developing a diverse line of products and suspension applications for the street. H&R's commitment to producing a quality product allowed them to obtain TUV certification and the European performance spring market was born. All products are made in Germany and exceed ISO quality assurance standards.

Order this Set of H&R Sport Coil Springs for your 2014, 2015, 2016 or 2017 Focus ST from CJ Pony Parts today!

Similar Focus Parts

similar Focus parts More Lowering Springs  

Installation Instructions

Mustang Installation

Focus Applications

This product will fit the following Ford Focus years:

Product Reviews

Write a review
H&R Coil Spring Sport Set Focus ST 2014-2016 is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from Worth it!!! I put these on my 2016 focus st 3 weeks ago and I love them! No sacrifice on the ride quality. Handles MUCH BETTER. And the stance is perfect. Side note* I have stock wheels n tires with 20mm spacer in the front and 25mm rear. I wouldn't go any wider or tour going to catch the fender. No rubbing at all for me!
Date published: 2016-06-02
Rated 5 out of 5 by from H&R SPORT LOWERING COILS These springs lowered my ST just enough, without taking away from the ride quality. I can now take on corners more aggressively. I installed these springs with H&R 20/25 mm wheel spacers for a more aggressive look. I did notice that the driver side front wheel is slightly lower than the passenger right side, from my understanding they should set evenly in about a week. I highly recommend these spring and for the price it's hard to look anywhere else. I would also recommend having an extra set of hands to help out with the install, took me a little over 5 hours to do.
Date published: 2016-09-05
Rated 5 out of 5 by from Value/Quality Straight forward, great German quality, and no sag performance.
Date published: 2015-05-27
Rated 5 out of 5 by from WOW So honestly for a cheap and quick way to get some stance. These springs will make the difference. My car dropped a lot more than was expecting, i want to almsot slam my car for the goal and this set up it a pretty close for a temp. Heard you can blow shocks faster but my car is running just fine and noticed that after a week it's still settling down. install was a pain for the fronts but got it done and couldn't be happier with what i paid and got for them. WOULD RECOMMEND.
Date published: 2017-01-12
Rated 5 out of 5 by from H&R I've had these springs installed about 2 months now and not a single complaint. Drops it just the right amount without sacrificing ride quality. Give them a shot, you won't regret it!
Date published: 2016-11-29
Rated 5 out of 5 by from Great Springs These springs are built right! No sag and feels better than stock. Sits exactly as stated in the description. Wish I got them sooner.
Date published: 2015-10-19
Rated 5 out of 5 by from Great quality my car looks great when i install it i never regret
Date published: 2016-08-22
  • y_2017, m_2, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_HR516642, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 53.96ms

Product Questions

Will these push the negative camber out more? Or will it stay the same factory camber?

Asked by: Miah117
The camber may change slightly When changing to lowering springs the alignment should always be checked.
Answered by: rk cjpp
Date published: 2017-02-14

will a 19" rim and tire fit this? was looking at getting the RS wheels you have on here as well. i believe they were 19x8.5

Asked by: JoeHoinoski
Yes they will.
Answered by: rk cjpp
Date published: 2016-11-02

Hi guys, will these H&R springs fit my 2016 Focus ST 250 (Facelift). We cannot get H&R in the UK for the Facelift model so just checking before i go ahed and purchase these for my 2016 Focus ST. Thanks guys Mark 

Asked by: Mark ST250
You should be fine.
Answered by: CJPP Dave
Date published: 2016-09-12

Do I need any additional hardware? Like front and rear endlinks, chamber arms? Ext. Will cause my car to chamber?

Asked by: FocusSTpro
No additional hardware necessary. I installed on a 2016 Focus ST in addition to 20/25 mm wheel spacers for a more aggressive look.
Answered by: mveightseven
Date published: 2016-09-05

Would these fit 2013 st focus

Asked by: Andfrew08
We offer these for the 2013 focus st, http://www.cjponyparts.com/h-r-coil-spring-sport-set-focus-st-2013/p/HR51664/
Answered by: rk cjpp
Date published: 2016-08-24

I know these are set to fit an st, but would they fit the se model as well?

Asked by: Whitct34
Answered by: CJPP Dave
Date published: 2016-06-17

Will I need camber plates or bolts for this installation. I'm hoping not

Asked by: Jbr600rr
You may, any time you lower a car the alignment should be checked and adjusted.
Answered by: rk cjpp
Date published: 2017-01-27

Difficulty to install?

Asked by: Novak1
Not very. Watch the installation video on CJ part # 414035 - that should give you a good idea of what this installation looks like.
Answered by: CJ Pony Parts
Date published: 2016-06-19
  • y_2017, m_2, d_23, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_HR516642, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 168.7ms

You Might Also Like

Product Video

H&R Coil Spring Sport Set Focus ST 2014-2017 Video Transcript
By Bill Tumas: We’re here with a set of H&R lowering springs for your 2014 Focus ST.

H&R springs are made in Germany and are known worldwide for their high quality construction. They're made of a high-tensile steel guaranteeing never to sag. This particular kit will fit your 2014 Focus ST. It will lower the front 1.4" and the rear 1.3".

These H&R coil springs are designed specifically for your 2014 Focus ST. Because of a change to the front strut mount they will not fit a 2013.