Pair of Black Housing '2015 Style' Projector Headlights with LED Sequential Turn Signals and Smoked Lenses for all 2010, 2011 and 2012 Mustangs without HIDs.
Are looking to truly make your 2010-2012 without HIDs stand out from the pack? If so, look no further than this pair of '2015 Style' Projector Headlights with LED Sequential Turn Signals from CJ Pony Parts today!
Available in 3 different great options, the Chrome Housing w/ Clear Lens, Black Housing w/ Clear Lens or Black Housing w/ Smoked Lens will significantly change the appearance of your Mustang while adding some amazing new features. The built-in sequential LED turn signals showcase a set of 3 white vertical LED bars that will stay on with your parking lights and are reminiscent of the 2015 Mustang. But when your turn signals are activated, the LED bars will blink in a sequential pattern while utilizing a DOT approved amber color.
Features and Benefits:
- Projector Style Bulb for Increased Light Output
- Sequential Amber LED Turn Signals
- White Vertical LED Bars Similar to 2015 Mustangs
- High/Low Beam Adjustment Screws
- Direct Fit Plug and Play Installation
- H1 High/Low Beam Headlight Bulbs are Included
- Street Legal and DOT Approved
- Sold as a Pair
- 2010 Shelby GT500 without HIDs
- 2010-2012 V6/GT/Boss 302 without HIDs
- Chrome Housing with a Clear Lens
- Black Housing with a Clear Lens
- Black Housing with a Smoked Lens
*HIDs became standard on the GT500 in 2011 and stayed with the GT500 until 2014. In 2010-2012, HIDs were optional across all models but became standard in 2013 and 2014 for all models.
Please Note: These headlight assemblies will NOT work with 2010-2012 Mustangs equipped with Factory HID Headlights.
These headlights are a direct fit and feature a simple Plug and play installation. Projector style H1 bulbs are included and pre-installed for a very bright overall light output. You will simply plug one harness into your parking light socket and then install that socket into the new housing. And then the main headlight harness will just plug in like a factory bulb would. Please keep in mind that parking light bulbs are not included as they are replaced with the pre-installed sequential LED boards that offer you that ‘2015 Style’.
Order this pair of '2015 Style' Projector Headlights with LED Sequential Turn Signals for your 2010, 2011 or 2012 Mustang without HIDs from CJ Pony Parts today!
Product ReviewsWrite a review
I'm interested in purchasing these and using an aftermarket LED headlight conversion, do these use a single Hi/Low H1 bulb or 2 separate bulbs per housing?
I went from an aftermarket HID setup to this and the light output was reduced dramatically. Is there a way to upgrade the existing halogen bulbs with an HID kit? if so, is it safe to do so on projector assemblies? Thanks!
Whats the gross weight of this item?
You Might Also Like
From:CJ's Low Price:$332.99
CJ's Low Price:$74.99
CJ's Low Price:$578.00
CJ's Low Price:$399.99
Here you can see the white tri-bar LED. These will come on as your parking lights on the car. Then when you switch to turn signals, you get an amber sequential LED. These lights are available in three versions. The black housing with a smoked lens shown here along with a black housing with a clear lens and a full clear with chrome inside. Here you can see the back of the headlight has factory style adjusters and also has two factory plugs. This will plug into your headlight plug. That goes into your turn signal plug. Again, for a plug and play installation. These LED headlights are a great way to add a nice custom modern touch to your 2010-2012 Mustang.