Heater Blower Motor With Cage 1965-1966/Without Air Conditioning 1967-1968

CJ's Part Number: HMA10
CJ's Low Price:
$77.99
1469836800 17926
Earn 77 RPM Points What's this?
Heater Blower Motor With Cage 1965-1966/Without Air Conditioning 1967-1968
Heater Blower Motor With Cage 1965-1966/Without Air Conditioning 1967-1968 Play Heater Blower Motor With Cage 1965-1966/Without Air Conditioning 1967-1968 Video 1

Product Description

Heater Blower Motor with a Cage for all 1965-1966 Mustangs and 1967-1968 Mustangs without Air Conditioning.

Don't let the weather keep you from driving your beloved 1965-1968 Mustang! Ride around in comfort, even when it's cold outside, after you replace your old heater blower motor with this new one!

Features & Benefits:
- Three-Speed
- Fits All 1965-1966 Mustangs and all 1967-1968 Mustangs without Factory Air Conditioning
- Includes Wiring, Motor, Mounting Studs and Squirrel Cage
- Pretested by the Manufacturer
- Comes Ready to Install

This Heater Blower Motor is a 3-speed motor that fits all 1965-1966 Mustangs and all 1967-1968 Mustangs that don't have factory air conditioning. It's pretested by the manufacturer and comes to you ready to install! You'll get the wiring, motor, mounting studs and squirrel cage with your order.

*Motor uses 2-wire connection.

If your Mustang's engine isn't at the right temperature, it's not going to perform properly. Similarly, if you're not comfortable when driving your Mustang, you're going to not want to drive it anymore. CJ Pony Parts has every part you need to keep these vital systems in your Mustang running in perfect condition!

Order a Heater Blower Motor with a Cage for your 1965-1966 Mustang or your 1967-1968 Mustang without Air Conditioning from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Heater Controls & Registers  

Installation Instructions

Difficulty

Difficulty: Moderate

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Heater Blower Motor With Cage 1965-1968 is rated 3.25 out of 5 by 8.
Rated 3 out of 5 by from Blows like a hurricane This certainly met my overall goal: real heat in Colorado winters. My original motor was on its last leg and I wanted the air velocity of a modern car. However, it comes with the wrong connectors for a stock wiring harness. Go ahead and find some 16-14 gauge male bullet connectors and cut these off. I also had one of the four mounting bolts snap clean off with little effort on tightening. A mixture of improvement and disappointment.
Date published: 2015-02-14
Rated 4 out of 5 by from Good replacement. Couple of things, check wiring and wheel rotation before the motor is installed in the heater box as the wire color is different than stock. This came painted ready to install but without the thick donut gasket that mounts between the flange and firewall.
Date published: 2015-08-28
Rated 1 out of 5 by from My first one is a bust! I'm not sure if I received a defective unit or not. Blower worked fine during testing but after my first Drive it sounds terrible. I just emailed customer service to see what can be done to fix it
Date published: 2016-03-13
Rated 1 out of 5 by from Bad motor I bought this for a 68 I was redoing and the bearing was bad and the first motor. I had to adjust the squirrel cage several times as well and the welded on flange didn't fit properly
Date published: 2016-04-07
Rated 4 out of 5 by from Fitted the replacemen HBA367-68 W/O A/C HEATER BOX Motor assembly fitted without any clearance or catching issues. Looks to be of good quality although the connectors on the wiring need doing but this is an easy job.
Date published: 2015-11-16
Rated 4 out of 5 by from Good value I usually don't need heat or defroster, but if I do this will help. Fit is good, just wish the wiring connectors were there and oem style.
Date published: 2016-03-12
Rated 5 out of 5 by from Perfect Easy to install and works fine. Had to crimp the wire connections
Date published: 2016-03-31
Rated 4 out of 5 by from Fits the bill Much needed part to complete heater box repairs. Looks nice.
Date published: 2015-10-06
  • 2016-07-30T07:45CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_HMA10, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 177.03ms
  • REVIEWS, PRODUCT

Product Questions

Same question about wiring . Original wiring yellow and brown,new black and blue ? What hooks to what?

Asked by: Gumby01
The yellow goes to the resistor so that should hook up to the black and the brown is the power so that should go to the blue wire, if the motor spins in the wrong direction than reverse these wires.
Answered by: rk cjpp
Date published: 2016-06-14

what is the size of squirrel cage width, height, bore size

Asked by: calf

This blower motor has a black and blue lead. Wiring harness has yellow and brown. Which is negative?

Asked by: Lemas41
  • 2016-07-30T07:57CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_HMA10, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 158.91ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Heater Blower Motor With Cage 1965-1966/Without Air Conditioning 1967-1968 Video Transcript
By Bill Tumas: We’re here with a replacement heater motor assembly for your 1964 through 1968 Mustang. This heater motor assembly will fit all '64 through '66 Mustangs and will work on '67s and '68s when not equipped with factory air conditioning. The assembly includes the wiring, the new motor with the mounting studs, as well as a new squirrel cage. All of our heater motor assemblies are pretested by the manufacturer and come ready to install.