Pair of Hedman Square Port HTC Coated Shorty Headers for 1965-1973 289/302 Mustangs.Hedman's HTC coated headers are manufactured using 18 gauge, mandrel bent primary tubes, and 1/4" flanges. Features 1-1/2" port primaries and 2-1/2" collectors.
The HTC coating on these headers provides thermal protection up to 1300 degrees and will not chip or peal. This gives you better heat protection and is more durable than chrome. HTC coated headers are also guaranteed against external rust-through.
All Hedman street Hedders are MADE IN THE USA.
*The Square Port design will work with some original heads and aftermarket heads such as AFR, Trick Flow and Ford Racing GT40s.
Product ReviewsWrite a review
Hi, i am using a clutch cable installation on my 1970 mach 1 will these headers work
Yes they should work.
Date published: 2016-11-06
Hi, Will these header fit the AFR heads N° 1422 58CC for Engine 289 (Mustang Fastback 1965)? Thanks
The Square Port design will work with some original heads and aftermarket heads such as AFR, Trick Flow and Ford Racing GT40s.
Date published: 2016-10-03
Will these work on a 65 Mustang with a 351w, T5 and original clutch linkage?
No, they will not work.
Date published: 2016-04-26
Hi, I plan on using these on a 66 mustang with a 289 "C" code. I also plan on putting on the Borgenson power steering upgrade as well, will they work together without clearance issues? thanks,,
They should work fine together, make sure your heads have a square port.
Date published: 2016-12-25
Will these headers (88406) fit into/suit 1969 mustang coupe converted to right hand drive using XF Falcon steering box. Motor is a 302Windsor stroked to 347 and has edelbrok heads.
Unless specifically noted, we cannot confirm fitment on right hand drive applications.
Date published: 2015-10-19
I wanted to know if these headers will work with a 4 speed transmission on my ' 68 fastback with no clearance issues? Thanks!
That more depends on whether your 1968 meets the other specs listed. If it does, you should be good.
Date published: 2015-08-03
Hi. I have a 1969 Mach with a 4v 351w and AFR 165 heads. Most say the heads are too small, but the Mach runs great. My question is" Will the Hedman shorty elites fit" ? FMX auto, PS, No AC. I am probably on file with you. Been working on the Mach. Thanks
You Might Also Like
CJ's Low Price:$499.99