Fiberglass Hood with a 3" Cowl for 1965-1966 Mustangs.Have you been looking for a great upgrade to drop some weight and add some new style to the front end of your 1965-1966 Mustang? This new Fiberglass Hood with a 3" Cowl induction will bring some modern technology and a sleek updated appearance along with it.
This new fiberglass hood has a 3" cowl induction and is designed to fit all 1965 and 1966 Mustangs. This Fiberglass Hood with a 3" Cowl has an aluminum plate that is manufactured directly into the hood's composition to reinforce and secure the mounting of the hood latch bracket. The hinge brackets are also supported and reinforced by aluminum plates residing between the top and bottom of the hood. These reinforcements make sure that you will have a securely mounted and closed hood, once properly adjusted and installed.
For proper installation and the best fit for fiberglass hoods, the removal of the stock hood springs and the use of a new prop rod and hood pins are highly recommended. Aftermarket fiberglass body parts do not fit the same as factory, stamped steel body parts do. They can be finished to show quality, but fiberglass body parts are built closer to race car standards than to show car specifications.
*For use without hood hinge springs.
*A hood prop rod and hood pins are highly recommended.
Similar Mustang PartsMore Hoods
Product ReviewsWrite a review
Hello! Would this hood also fit a 1967 mustang coupe? Thanks!
No, the Mustang was redesigned for 1967, so the hood from an earlier model won't fit.
Date published: 2015-04-14
You Might Also Like
CJ's Low Price:$656.99
CJ's Low Price:$734.99
CJ's Low Price:$839.99
From:CJ's Low Price:$2,374.99