Ididit Ford Style Direct Swap Tilt Steering Column for 1965-1966 Mustangs.Enjoy many miles of smooth cruising when you add the convenience, comfort and reliability of a new steering column built specifically for your classic Mustang. Ididit's Ford style steering column is a direct swap, just add your stock Mustang wheel to the top of the column and the gripping surface of the wheel will be in the same location.
Included with your new column is a floor mount to secure the lower half of the column to the floor. Save your original under-dash mount to secure the column to your dash. Use one of Ididit's installation kits to make installing the column to your steering box or rack and pinion system a breeze.
- Self-canceling turn signals
- Tilt function
- Knobs and handles
- Floor mount
- Ford turn signal switch
- Ford top shaft allows you to use your original Ford steering wheel
- 3/4"-36 spline lower shaft
Available in your choice of a black powder-coated finish, a chrome plated finish or in bare steel for you to add your own classic finish.
*Requires a 3/4"-DD x 3/4"-36 spline coupler to attach to the steering box (HW2916).
*The long shaft from the 1965-1966 steering box must be modified and shortened.
Similar Mustang PartsMore Steering Column
Product ReviewsWrite a review
This is Marvin again. Just wondering if there is installation instructions included with the parts. Also is everything included to do this procedure?
If you scroll down the product page on CJ's web site there are instructions, this part requires a 3/4"-DD x 3/4"-36 spline coupler to attach to the steering box (HW2916).
Date published: 2016-01-27
Do I still use my long shaft in my 66 mustang. I understand that it has to be cut at the top for the tilt part to work. Is this correct?
The long shaft has to be cut 4 inches from the nut on the steering box.
Date published: 2016-01-26
How do I know what length shaft I'm ordering. Is this column available in 28" Thanks..
The column is only available in one size.Requires a 3/4"-DD x 3/4"-36 spline coupler to attach to the steering box (HW2916). *The long shaft from the 1965-1966 steering box must be modified and shortened.
Date published: 2015-11-23
is this steering column compatible with the Borgeson power steering box?
It might fit, but could need some customization.
Date published: 2015-08-24
Will this adapt to the Borgenson power steering kit for '65 Mustang and is it sold without shaft
It could adapt, but might need some customization depending on your Mustang. It isn't sold without a shaft, since it's a shaft kit.
Date published: 2015-08-24
You Might Also Like
From:CJ's Low Price:$514.99
From:CJ's Low Price:$409.99
CJ's Low Price:$44.99