Mustang Ididit Steering Column Tilt Ford Style Direct Swap Paintable Steel 1967
Part Number: 1120643010
Ididit Ford Style Direct Swap Tilt Steering Column for 1967 Mustangs.
Enjoy many miles of smooth cruising when you add the convenience, comfort and reliability of a new steering column built specifically for your classic Mustang. Ididit's Ford style steering column is a direct swap, just add your stock Mustang wheel to the top of the column and the gripping surface of the wheel will be in the same location.
Included with your new column is a floor mount to secure the lower half of the column to the floor. Save your original under-dash mount to secure the column to your dash. Use one of Ididit's installation kits to make installing the column to your steering box or rack and pinion system a breeze.
- Self-canceling turn signals
- Tilt function
- Knobs and handles
- Floor mount
- Ford turn signal switch
- Ford top shaft allows you to use your original Ford steering wheel
- 3/4”-36 spline lower shaft
- 4-way flashers(67-69 only)
Available in your choice of a black powder-coated finish, a chrome plated finish or in bare steel for you to add your own classic finish.
*Can be used with a short shaft steering box or a long shaft steering box.
*Short shaft steering boxes require installation kit part number HW2913 which includes 2 u-joints and a short shaft.
*Long shaft steering box requires a 3/4”-DD x 3/4”-36 spline coupler (HW2916) to attach to the steering box.
*The long shaft from the 1967 steering box must be modified and shortened.