Ididit Ford Style Direct Swap Tilt Steering Column for 1967 Mustangs with Rack and Pinion Steering and Borgeson Power Steering Boxes.Enjoy many miles of smooth cruising when you add the convenience, comfort and reliability of a new steering column built specifically for your classic Mustang. Ididit's Ford style steering column is a direct swap, just add your stock Mustang wheel to the top of the column and the gripping surface of the wheel will be in the same location.
This column is slightly shorter than the standard column which allows it to work with an aftermarket rack and pinion or Borgeson Power Steering Box. Included with your new column is a floor mount to secure the lower half of the column to the floor. Save your original under-dash mount to secure the column to your dash. Installation also requires 2 u-joints and a short steering shaft to connect the column to the rack and pinion. Use one of Ididit's installation kits to make installing the column to the rack and pinion system a breeze.
- Self-canceling turn signals
- Tilt function
- Knobs and handles
- Floor mount
- Ford turn signal switch
- Ford top shaft allows you to use your original Ford steering wheel
- 3/4"-36 spline lower shaft
- 4-way flashers(67-69 only)
Available in your choice of a black powder-coated finish, a chrome plated finish or in bare steel for you to add your own classic finish.
*Part number HW2916 is the u-joint that connects the steering column to the short steering shaft, part number HW2921.
*Part number HW2868 is used to connect the ididit steering column to a Borgeson power steering box.
*Manual rack and pinions from Flaming River or Rod and Custom require a 9/16"-26 spline u-joint, part number HW2918 or FR1709DD.
*Power rack and pinions from Flaming River require u-joint FR1789P.
*Power rack and pinions from Rod and Custom require a 3/4"-36 spline u-joint (HW2917), or a vibration reducer joint (HW2920).
Similar Mustang PartsMore Restomod Steering
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Hi, does 1968 steering wheel fit into STC11 Ididit Steering Column Tilt Ford Style Direct Swap Chrome Plated Rack And Pinion 1967
Will part number STW17KB steering wheel with adapter fit this steering column? and if not do you have this steering wheel with an adapter that will fit the ididit column STC10-V.
Is this column the collapsible one as that is required in Australia.
Can this column also be used with an aftermarket steering wheel such as the Moto-lita wheel?
You Might Also Like
From:CJ's Low Price:$514.99
CJ's Low Price:$44.99
CJ's Low Price:$23.99
CJ's Low Price:$75.99
CJ's Low Price:$105.95