Ididit GM Style Direct Fit Tilt Steering Column for 1967-1969 Mustangs with Short Shaft Steering Boxes.Enjoy many miles of smooth cruising when you add the convenience, comfort and reliability of a new steering column to your classic Mustang. Ididit's GM style steering column is offered in steel and aluminum finished versions and comes with a GM upper shaft, a GM 3-7/8" wire plug, self-canceling turn signals, 4-way flashers, knobs and handles and a 3/4"-36 spline lower output shaft. For safety reason, Ford switched over to a collapsible style steering column in 1967. This GM style column is designed to accommodate 1967-1969 Mustangs with short shaft steering boxes built after the switch.
Remove your old column, saving your original under-dash mount as well as the original floor mount. Using one of Ididit's installation kits, install the new steering column in place of your old column. Add an aftermarket wheel of your choice and the gripping surface of the new wheel will be in the same location as the original.
- Self-canceling turn signals
- Tilt function
- Knobs and handles
- 8-position tilt
- 3-7/8" wiring plug
- 3/4"- 36 spline lower shaft
- 4-way flashers
- a Ford wheel will NOT bolt on top of the GM style column
- Can use STWMK7 to mount Grant Steering wheels
- 9-bolt adapters are also available for many popular wheels, including LeCarra
Steel versions are available in your choice of finish options that include black powder-coated, chrome plated or bare steel for you to add your own classic finish. Aluminum versions are available with a brushed finish or a polished finish.
*Will not fit 1967 Mustangs with a long shaft steering box.
*Requires a 3/4"-36 spline x 3/4"-36 spline rag joint (HW2915) to attach to the steering box.
*The rag joint works as a coupler as well as a vibration dampener.