Inner Tie Rod End Driver Side Power Steering V8 1965-1966

CJ's Part Number: ES714
CJ's Low Price:
$29.99
1472083200 12816
Be sure to get a passenger side inner tie rod end too!
Earn 29 RPM Points What's this?
Inner Tie Rod End Driver Side Power Steering V8 1965-1966

Product Description

Driver Side Inner Tie Rod End for all 1965-1966 Mustangs with a V8 Engine and Power Steering.

Over time, your Mustang's original inner tie rod end can sustain some damage due to normal everyday wear and tear. So replacing it is an important part of keeping your Pony safely on the road.  So if you're upgrading the steering components on your classic 1965-1966 Mustang, then you should definitely look into getting a new Driver Side Inner Tie Rod End! It's connected to the outer tie rod by a tie rod end sleeve, and it connects the driver side to the steering center link on Mustangs with power steering.

This Driver Side Inner Tie Rod End comes with a castle nut, grease fitting, dust boot and cotter pin.

Please Note: This Driver Side Inner Tie Rod End is meant for 1965-1966 Mustangs that have a V8 engine and power steering.

Beloved the world over as a true American classic from the beginning, the Mustang has proven itself to be a formidable basis for some serious performance upgrades. It’s why, here at CJ Pony Parts, we do our best to bring together as many parts and accessories from some of the top suppliers. We know you want the best in Mustang performance!

Order a Driver Side Inner Tie Rod End for your 1965-1966 Mustang with a V8 Engine and Power Steering from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Tie Rods  

Installation Instructions

Difficulty

Difficulty: Moderate

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Inner Tie Rod End Driver Side Power Steering V8 1965-1966 is rated 3.0 out of 5 by 3.
Rated 2 out of 5 by from Threaded end of balljoint too small Taper on ball joint shaft fits ok but the threaded end is much smaller than original. The nut is very small and it barely has enough shoulder to keep from pulling through the hole in the tie rod. Potentially unsafe. Otherwise it bolts up ok. Would rate this higher if not for the safety/reliability concern.
Date published: 2015-10-09
Rated 2 out of 5 by from Quality OK Quality is OK, Just no mention of the size of the threading was specified and that there was no suggestion as to get a sleeve.
Date published: 2015-06-15
Rated 5 out of 5 by from Great replacement Great replacement and good quality for this part with new pin, nut and a good grease fitting
Date published: 2015-01-08
  • 2016-08-25T07:59CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_ES714, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 228.16ms
  • REVIEWS, PRODUCT

Product Questions

I just received this tie rod with #ES638S, they do not thread together. I have the outter tie rod that does work with ES638S, but this tie rod is boarder line stripping the threads, any suggestions?

Asked by: Jacob s

will the inner tie rod for the drivers side v8 power steering work on manual steering i can not find one thanks for the help

Asked by: mike123kiv
  • 2016-08-25T08:19CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestions, tq_2
  • loc_en_US, sid_ES714, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 85.32ms
  • QUESTIONS, PRODUCT

You Might Also Like