Interior Kit Black With Mass Back Carpet For Power Windows Coupe 1987-1989

CJ's Part Number: IK50ABPM
MSRP: $1,752.98
CJ's Low Price:
$1,392.99
1481155200 50121
Earn 1392 RPM Points What's this?
Interior Kit Black With Mass Back Carpet For Power Windows Coupe 1987-1989
Interior Kit Black With Mass Back Carpet For Power Windows Coupe 1987-1989 Interior Kit Black With Mass Back Carpet For Power Windows Coupe 1987-1989 Interior Kit Black With Mass Back Carpet For Power Windows Coupe 1987-1989

Product Description

Black Interior Kit with Mass Back Carpet for 1987, 1988, and 1989 Coupe Mustangs with Power Windows.

Is the black or smoke gray interior in your 1987-1989 Fox Body Mustang old and worn? If so, you are certainly not alone. These cars are now advanced in age and most are in need of restoration. If this is the case for you, then these interior kits with premium quality name brand components are the perfect solution for you. These kits will replace the major areas of wear in your interior and make it look new again!

Kit Includes:
- ACC Original Style Floor Carpet
- TMI Door Panels with Door Panel Clips
- TMI Sport Seat Upholstery
- Pair of Sun Visors
- Headliner Material with Spray Adhesive (Only included in coupe and hatchback kits)

All of these kits come with black or smoke gray interior components to match your Mustang's interior.

Carpet:

This interior kit includes molded original style carpet from ACC. It comes in your choice of either standard carpet or standard carpet with mass back. This original style carpet is precision heat molded for an easy installation. It is made using original style cut pile carpeting for an authentic look and feel. ACC's nylon cut pile is constructed from 100 percent first quality DuPont yarn. The material is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard. The nylon cut pile material is dyed using the finest dyes available and tested for ozone humidity fading and light fastness. The underside of the standard carpet without mass backing features heavy 36 ounce jute padding for insulation.

Mass back is a tough, rubber layer between the carpet and the jute insulation that increases the form and rigidity of the carpet, while decreasing road noise. At 40mils thick, it virtually eliminates the need for Dynamat or any other type of additional sound deadener. Mass back carpet will fit just like the original carpet once it is installed, but increases moldability, sound deadening and insulation. Mass back carpet retains shape much better than a standard poly backed carpet making for a much easier installation.

*ACC's carpets do not come with pre-cut holes, allowing you to make the necessary cuts only where needed for various interior components.

Door Panels:

The door panels that are included in this kit are premium quality TMI parts. TMI's door panels are made from heavy 30-32 oz. vinyl, just like the originals, and feature original style heat seam line patterns that are an exact replication of the original Ford seams. Constructed with a full ABS backing board that will not warp, as opposed to the originals which were cardboard backed in the lower sections. Cardboard often warps over time and when it gets wet, leaving your interior looking dated and worn out.

These door panels come without inserts above the armrests. They also feature lower carpet to perfectly match your originals. Door panels are completely assembled and ready to install, just transfer over your existing armrest assembly and your power or manual window mechanisms. They are constructed with a full ABS backing board that will not warp, as opposed to the originals which were cardboard backed in the lower sections. Cardboard often warps over time and when it gets wet, leaving your interior looking dated and worn out. The door panels will include the inner window beltline, stainless steel door lock grommets, and color matched speaker covers. Two sets of door panel clips are included for a total of 24, which will be enough to install both door panels.

*Does not include armrest assembly which is shown.
*
Door panels without an insert above the armrest were not an original option on 87-89 Mustangs.

Upholstery:

A full set of TMI premium quality Sport Seat upholstery is included in this 1987-1989 Fox Body interior kit. Upholstery for both front seats as well as the rear seat upholstery is included to avoid mismatched colors and material. The TMI Sport Seat upholstery in these kits feature a tweed cloth center with vinyl sides. Sport seat upholstery has raised thigh bolsters for added comfort while driving. This upholstery requires no modifications for installation on your factory seat frame when used with the correct seat foam.

*The TMI Sport Seat Upholstery requires the use of TMI’s Sport Seat Foam (SF11).

Sun Visors:

The coupe and hatchback interior kits come with the correct cloth covered sun visors, and convertible interior kits come with vinyl covered sun visors. These are direct replacements that will install in the factory location. Additionally, they are made from premium quality materials and look just as good as the originals. These sun visors do not include a light, mirror, bracket, or hardware.

Headliner:

This interior kit comes with headliner material, allowing you to re-use your factory headliner backing board. The material is made of a foam-backed cloth like original. This replacement black headliner material will complement the rest of your interior and make it look showroom new. Also included is Eastwood’s 14 oz. aerosol can of carpet and general purpose adhesive with extension nozzle. This will be a sufficient amount of adhesive to complete the installation of your headliner.

Order an Interior Kit with TMI Sport Seat Upholstery for your 1987, 1988, or 1989 Coupe, Hatchback, or Convertible Mustang from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 85.48ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 99.38ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like