Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967

CJ's Part Number: IK57PCM
MSRP: $1,397.05
CJ's Low Price:
$1,107.99
1480723200 62978
Earn 1107 RPM Points What's this?
Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967
Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967 Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967 Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967 Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967 Interior Kit With Front Floor Cut Pile Mass Back Carpet Parchment Bronco 1967

Product Description

Parchment Interior Kit with Front Floor Cut Pile Carpet with Mass Backing for all 1967 Broncos.

Freshen up your 1967 Bronco's interior and replace all of the wear & tear by ordering this all-new Interior Kit with Front Floor Cut Pile Carpet with Mass Backing. CJ Pony Parts has done the legwork for you, so you can receive everything needed to restore your classic interior with just one click.

When you purchase this kit, you'll have the option to select whether you would like the kit to be black or parchment. This choice of color will affect the kit's upholstery, quarter trim panels and sun visors.

Kit Includes:
- Full Set of Black or Parchment Seat Upholstery
- Pair of Front Bucket Seat Foam
- Rear Seat Foam
- ACC Black Passenger Area Cut Pile Carpet with Mass Backing
- Pair of Black or Parchment Interior Quarter Trim Panels
- Pair of Black or Parchment Sun Visors

The first thing that this kit will allow you to do is swap out that old and worn upholstery in the front and rear of your Bronco with a new full set that will come in your choice of black or parchment. This high-quality OE reproduction is manufactured with original Sierra grain 32 ounce vinyl that includes the correct Rosette grain inserts and matching sewn patterns.

The seat foam will come as a pair for your driver and passenger front buckets, along with rear seat foam to encompass your entire rear bench seat. Each piece of seat foam features a two-piece design that will feature a piece for your seat back and another for the seat bottom. It will immediately restore the proper shape, density, look and feel of your classic Bronco's seating. Combined with the new upholstery, you and your passengers will enjoy a more comfortable drive in your Bronco.

The carpet that is provided in this kit has been precision heat molded for a perfect fit after it's produced from ACC's premium nylon cut pile material. It is then dyed black using the finest dyes available and tested for ozone humidity fading & light fastness. The carpet also has exposed edges that have vinyl binding along with a heel pad for more resistance to long-term wear.

The underside of the carpet features heavy 36 ounce jute padding for insulation. Between the jute padding and carpet is a mass backing that that will increase the overall form and rigidity of the carpet. This tough, rubber layer will also provide quality sound deadening to decrease any road noise. This mass back carpet will retain its shape much easier & more efficiently than standard carpet.

Rounding out this interior kit is a pair of interior quarter trim panels as well as a pair of sun visors. Both pairs will come in either black or parchment and are fantastic OE reproductions. The quarter trim panels are manufactured from original Sierra grain vinyl with the correct dielectrically heat sealed vertical patterns. Using an interference fitment at the top, these panels will cover your hard top mounting bolts for a more finished look. The sun visors are made with original grain vinyl as well and come with the vinyl binding stitching just like the originals.

*The carpet in this kit does NOT come with pre-cut holes, which will allow you to make the necessary cuts only where needed for various interior components.

Tech Tip: When you first take your new carpet out of the box, you may notice quite a few wrinkles. This is normal. We recommend laying the carpet out in the sun for a few hours to help soften the jute backing along with reducing the amount of wrinkles that are visible prior to installation.

*The quarter trim panels in this kit are designed to be used with your Bronco's hard top on. Using these panels without the top on will require some modifications.

Go ahead and purchase this Interior Kit with Front Floor Cut Pile Carpet with Mass Backing for your 1967 Bronco from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Bronco Applications

This product will fit the following Ford Bronco years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 130.36ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 146.29ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like