AMK Products Master Interior Fastener Kit With Standard Interior Fastback 1967

AMK Products: 67Z-63A
MSRP: $116.35
CJ's Low Price:
$114.99
Ships in 5-7 Days This item typically ships within 5-7 days1411171200
Earn 114 RPM Points What's this?
HW2411

Product Description

AMK Products Master Interior Fastener Kit for all 1967 Fastback Mustangs with Standard Interior.

This Master Interior Fastener Kit from AMK Products includes 361 total pieces of factory correct, OE style fasteners that are required to properly reassemble your 1967 fastback Mustang's interior in one convenient kit! This comprehensive interior fastener kit is specifically assembled for all 1967 fastback Mustangs equipped with a standard interior.

AMK Products' Master Interior Fastener Kit includes individually packaged sets of mounting hardware for various interior components in your 1967 fastback Mustang. Each package is thoroughly labeled so you know exactly where it goes in your interior. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the oval head sheet metal screws in AMK's interior kits are made from stainless steel with a chrome, black or zinc finish.

Master Interior Fastener Kit Includes:
- Ash Tray Liner: Phillips Pan Head Sheet Metal Screws (3)
- Automatic Shifter Assembly to Floor: Phillips Flat Head Sheet Metal Screws (4)
- Carpet to Floor without Console: Round Washer Head Screws (10)
- Coat Hooks: Phillips Oval Head Sheet Metal Screws (2)
- Dash Pad and Moldings: Phillips Oval Head Sheet Metal Screws, Stamped Nuts (9)
- Door Sill Plates: Stainless Steel/Chrome Phillips Oval Head Sheet Metal Screws (18)
- Driver Side Under Dash Air Vent to Cowl: Stamped Nuts with Sealer (4)
- Fold Down Seat Latch Covers: Phillips Oval Head Sheet Metal Screws, Washers (16)
- Front Seat Back Adjustment: Chrome Hex Bolts, Nuts, Flat Washers (6)
- Front Seat Back Adjustment Scuff Plates: Phillips Pan Head Sheet Metal Screws (4)
- Glove Box Catch: Phillips Pan Head Screw/External Washer Assembly (2)
- Glove Box Hinges: Hex Screw/Conical Spring Washer Assembly (6)
- Glove Box Latch: Phillips Pan Head Sheet Metal Screw/External Washer Assembly (2)
- Glove Box Liner: Phillips Round Washer Head Sheet Metal Screws (4)
- Heater Control to Dash: Phillips Oval Head/Hex Washer Head Screws, Nut/Washer Assembly, Nuts (8)
- Interior Door Handles: Chrome Phillips Oval Head Screws (2)
- Interior Mirror to Bracket: Chrome Phillips Oval Head Sheet Metal Screws (3)
- Kick Panels: Phillips Round Washer Head Sheet Metal Screws (4)
- Lower Dash Pad: Stamped Nuts (5)
- Lower Front Quarter Trim Panels: Hex Screw/Conical Washer Assembly, Phillips Oval Head Sheet Metal Screws, J-Nuts (20)
- Molding Above Trap Door: Retainers, Stamped Nuts (8)
- Passenger Side Instrument Finish Panels to Dash: Hex Washer Head Screws, Stamped Nuts, Nut/Washer Assembly (12)
- Quarter Trim Lower Corner Panels: Pop Rivets (4)
- Quarter Trim Side Moldings: Phillips Oval Head Sheet Metal Screws (12)
- Quarter Trim Panel Brackets: Phillips Pan Head Sheet Metal Screws (38)
- Quarter Trim Upper Corner Panels: Phillips Oval Head/Pan Head Sheet Metal Screws (6)
- Radio Opening Bezel or Cover: Phillips Oval Head Sheet Metal Screws, Spring Nuts (8)
- Rear Headliner Tack Strip: Phillips Wafer Head Sheet Metal Screws (12)
- Rear Seat Back Lower Anchor: Hex Screw/Conical Spring Washer Assembly (4)
- Rear Seat Upholstery to Floor: Phillips Pan Head/Round Washer Head Screws, Sealer (8)
- Rear Window Top Garnish Molding: Phillips Oval Head Screws (6)
- Standard Seat Moldings: Phillips Oval Head Screws, Phillips Head Screws, Pins, Fibre Washers (16)
- Standard Armrests: Hex Washer Head Sheet Metal Screws, Spring Nuts (8)
- Standard Door Panels: Retainers (32)
- Standard Instrument Bezel at Cluster: Phillips Pan Head Screws, Spring/Stamped Nuts (13)
- Sun Visor Brackets: Phillips Oval Head Sheet Metal Screws (6)
- Trim Panel Above Trap Door: Phillips Oval Head Sheet Metal Screws, Blind Rivets (7)
- Trunk Opening Floor Panels without Fold Down Seat: Round Washer Head Drill Screws, Hex Washer Head Sheet Metal Screws (11)
- Upper Front Quarter Trim Panels: Phillips Oval Head/Pan Head Sheet Metal Screws (10)
- Window Handles: Chrome Phillips Oval Head Screws (2)
- Windshield Pillar Trim: Retainers (6)

Buying individual sets of mounting hardware for your 1967 fastback Mustang's interior can be expensive and time consuming if you're not sure which hardware you need. This Master Interior Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1967 fastback Mustang equipped with a standard interior. With a Master Interior Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1967 fastback Mustang's interior is going to be reassembled with the finest factory correct hardware on the market!

This interior assembly fastener kit can be used in conjunction with the factory assembly manuals for guidance and correct hardware placement.

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!

*Does NOT include fold down seat hardware.
*Not for use on 1967 fastback Mustangs with deluxe interior and all 1967 Shelbys.

Please Note: The fold down seat was optional on 1967-1973 fastback Mustangs. If your 1967 fastback Mustang is equipped with a fold down seat, additional fastener kits must be purchased separately.

Similar Mustang Parts

similar mustang parts More Mustang Interior Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review