JLT Passenger Side Oil Separator Kit for all 2007-2014 GT500 Mustangs.JLT Performance's newest product to keep oil out of your intake is the oil separator. During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, can coat your blower rotors, intercooler fins and even dilute your gas, lowering its octane level. This happens on all engines and is even worse when supercharged as crankcase pressures are increased.
Milled from solid billet aluminum with a black or clear anodized finish, this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. JLT took this unit a step further and added a Ford Motorcraft metal mesh PCV Pre Filter element. This element collects the last bit of oil droplets and drains back into the tank when the engine is shut down. JLT has also included a factory PCV hose for an easy plug and play installation.
*The tank holds 2 oz. of fluid, while that may not sound like a lot, you shouldn't see that much oil in your PCV system. Drain it every oil change and you will never come close to filling it.
*Most of the oil will come from the passenger side, so if only getting one oil separator, this is the one to get!
Similar Mustang PartsMore Oil Separators & PCV Parts
Product ReviewsWrite a review
Your web site list a JLT passenger side oil separator for 2007 to 2014 (part #OILSEP11) for a GT500 (I thing that's a super charged Shelby) my car is a 2011 GT 5.0 what is the correct JLT unit for may 2011 GT 5.0 convertible mustang?
You should be looking at OILSEP4-V.
Date published: 2015-01-19